Discussion
Home ‣ Chemical Engineering ‣ Refractory Technology Comments
- Question
Segar cones are used for the determination of __________ of refractories.
Options- A. softening temperature
- B. spalling resistance
- C. electrical conductivity
- D. resistance to slag attack
- Correct Answer
- softening temperature
- 1. Which of the following has the lowest electrical resistivity?
Options- A. Graphite
- B. Fireclay
- C. Alumina
- D. Zircon Discuss
- 2. Silica refractories are not used in
Options- A. coke oven walls.
- B. beehive coke ovens.
- C. dome and upper portion of B.F. stoves.
- D. open hearth furnace roof. Discuss
- 3. Carbon bricks are not used in the lining of the
Options- A. combustion chamber of blast furnace stoves.
- B. electric furnaces.
- C. highly chemical resistant equipments.
- D. blast furnace hearth. Discuss
- 4. Pick out the wrong statement.
Options- A. Sand & coke is the main raw material for the manufacture of silicon carbide.
- B. Carbon refractories can not be used in the furnaces operating under reducing conditions.
- C. Mullite can be obtained by the heating of alusite, kyanite or silimanite.
- D. Silica occurs in nature in all cellular, amorphous or crystalline form. Discuss
- 5. Silica bricks have low spalling resistance below 600°C, due to its
Options- A. very high thermal conductivity.
- B. high co-efficient of expansion upto this temperature.
- C. high thermal diffusivity.
- D. low refractoriness. Discuss
- 6. Lower part of hot metal mixer are lined with __________ bricks.
Options- A. superduty fireclay
- B. high alumina
- C. silica
- D. carborundum Discuss
- 7. Pick out the wrong statement.
Options- A. Electrical conductivity of refractory is not important, when these are to be used in electrical furnaces.
- B. Graphite and metals are the good electrical conductor among the refractories and others are all electrical insulators.
- C. Refractories used for lining electrical furnaces should ordinarily have very low electrical conductivity.
- D. Electrical conductivity of porous refractory material is low. Discuss
- 8. Pick out the wrong statement.
Options- A. Fluxing material like lime is added in clay to reduce the vitrification temperature.
- B. Main constituents of clay are alumina and silica.
- C. Addition of sand in ceramic materials makes it non-plastic, increases its fusion point and reduces its shrinkage on burning.
- D. Vitrification of fireclay material is done to increase its porosity. Discuss
- 9. Refractory materials are never used in the construction of
Options- A. segar cones
- B. orton cones
- C. pressure vessels
- D. ovens & retorts Discuss
- 10. Dry mix hydraulic compositions of refractory aggregates with suitable bonding materials are called refractory
Options- A. mortars
- B. cements
- C. castables
- D. none of these Discuss
Refractory Technology problems
Search Results
Correct Answer: Graphite
Correct Answer: beehive coke ovens.
Correct Answer: combustion chamber of blast furnace stoves.
Correct Answer: Carbon refractories can not be used in the furnaces operating under reducing conditions.
Correct Answer: high co-efficient of expansion upto this temperature.
Correct Answer: carborundum
Correct Answer: Electrical conductivity of refractory is not important, when these are to be used in electrical furnaces.
Correct Answer: Vitrification of fireclay material is done to increase its porosity.
Correct Answer: pressure vessels
Correct Answer: castables
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.