logo

CuriousTab

CuriousTab

Discussion


Home Chemical Engineering Refractory Technology Comments

  • Question
  • Carbon bricks are not used in the lining of the


  • Options
  • A. combustion chamber of blast furnace stoves.
  • B. electric furnaces.
  • C. highly chemical resistant equipments.
  • D. blast furnace hearth.

  • Correct Answer
  • combustion chamber of blast furnace stoves. 


  • Refractory Technology problems


    Search Results


    • 1. Pick out the wrong statement.

    • Options
    • A. Sand & coke is the main raw material for the manufacture of silicon carbide.
    • B. Carbon refractories can not be used in the furnaces operating under reducing conditions.
    • C. Mullite can be obtained by the heating of alusite, kyanite or silimanite.
    • D. Silica occurs in nature in all cellular, amorphous or crystalline form.
    • Discuss
    • 2. Silica bricks have low spalling resistance below 600°C, due to its

    • Options
    • A. very high thermal conductivity.
    • B. high co-efficient of expansion upto this temperature.
    • C. high thermal diffusivity.
    • D. low refractoriness.
    • Discuss
    • 3. Which of the following bricks has the most close values of RUL and PCE?

    • Options
    • A. Silica bricks
    • B. Fireclay bricks
    • C. High alumina bricks
    • D. Tar dolomite bricks
    • Discuss
    • 4. Chrome magnesite bricks are

    • Options
    • A. acidic in nature.
    • B. neutral in nature.
    • C. having higher RUL than silica bricks.
    • D. made by mixing 30% chromite and 70% periclase.
    • Discuss
    • 5. Because of its very high refractoriness of the order of __________ °C, silicon carbide refractories are used in zinc smelting furnace, muffle furnace and for supporting the wares in tunnel kilns.

    • Options
    • A. 1800
    • B. 2200
    • C. 2400
    • D. 2700
    • Discuss
    • 6. Silica refractories are not used in

    • Options
    • A. coke oven walls.
    • B. beehive coke ovens.
    • C. dome and upper portion of B.F. stoves.
    • D. open hearth furnace roof.
    • Discuss
    • 7. Which of the following has the lowest electrical resistivity?

    • Options
    • A. Graphite
    • B. Fireclay
    • C. Alumina
    • D. Zircon
    • Discuss
    • 8. Segar cones are used for the determination of __________ of refractories.

    • Options
    • A. softening temperature
    • B. spalling resistance
    • C. electrical conductivity
    • D. resistance to slag attack
    • Discuss
    • 9. Lower part of hot metal mixer are lined with __________ bricks.

    • Options
    • A. superduty fireclay
    • B. high alumina
    • C. silica
    • D. carborundum
    • Discuss
    • 10. Pick out the wrong statement.

    • Options
    • A. Electrical conductivity of refractory is not important, when these are to be used in electrical furnaces.
    • B. Graphite and metals are the good electrical conductor among the refractories and others are all electrical insulators.
    • C. Refractories used for lining electrical furnaces should ordinarily have very low electrical conductivity.
    • D. Electrical conductivity of porous refractory material is low.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment