logo

CuriousTab

CuriousTab

Discussion


Home Chemical Engineering Refractory Technology Comments

  • Question
  • Because of its very high refractoriness of the order of __________ °C, silicon carbide refractories are used in zinc smelting furnace, muffle furnace and for supporting the wares in tunnel kilns.


  • Options
  • A. 1800
  • B. 2200
  • C. 2400
  • D. 2700

  • Correct Answer
  • 2700 


  • Refractory Technology problems


    Search Results


    • 1. Carbon refractories have very high

    • Options
    • A. wetting characteristics
    • B. refractoriness
    • C. thermal conductivity
    • D. both (b) and (c)
    • Discuss
    • 2. Which furnace consumes maximum refractory annually in an integrated steel plant?

    • Options
    • A. Soaking pit
    • B. Blastfurnace
    • C. L.D. converter
    • D. Coke ovens
    • Discuss
    • 3. High refractorinness of refractory bricks means, that it has a

    • Options
    • A. high spalling resistance.
    • B. low spalling resistance.
    • C. high resistance to fusion.
    • D. low porosity.
    • Discuss
    • 4. The main raw material for manufacture of silicon carbide refractories is

    • Options
    • A. corrundum
    • B. carborundum
    • C. bauxite
    • D. periclase
    • Discuss
    • 5. Sillimanite is a __________ refractory.

    • Options
    • A. basic
    • B. neutral
    • C. high alumina
    • D. insulating
    • Discuss
    • 6. Chrome magnesite bricks are

    • Options
    • A. acidic in nature.
    • B. neutral in nature.
    • C. having higher RUL than silica bricks.
    • D. made by mixing 30% chromite and 70% periclase.
    • Discuss
    • 7. Which of the following bricks has the most close values of RUL and PCE?

    • Options
    • A. Silica bricks
    • B. Fireclay bricks
    • C. High alumina bricks
    • D. Tar dolomite bricks
    • Discuss
    • 8. Silica bricks have low spalling resistance below 600°C, due to its

    • Options
    • A. very high thermal conductivity.
    • B. high co-efficient of expansion upto this temperature.
    • C. high thermal diffusivity.
    • D. low refractoriness.
    • Discuss
    • 9. Pick out the wrong statement.

    • Options
    • A. Sand & coke is the main raw material for the manufacture of silicon carbide.
    • B. Carbon refractories can not be used in the furnaces operating under reducing conditions.
    • C. Mullite can be obtained by the heating of alusite, kyanite or silimanite.
    • D. Silica occurs in nature in all cellular, amorphous or crystalline form.
    • Discuss
    • 10. Carbon bricks are not used in the lining of the

    • Options
    • A. combustion chamber of blast furnace stoves.
    • B. electric furnaces.
    • C. highly chemical resistant equipments.
    • D. blast furnace hearth.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment