logo

CuriousTab

CuriousTab

Discussion


Home Chemical Engineering Refractory Technology Comments

  • Question
  • Magnesite chrome refractories


  • Options
  • A. have better spalling resistance than chrome magnesite refractories.
  • B. have very low thermal co-efficient of expansion.
  • C. are not at all resistant to the corrosive action of iron oxide.
  • D. have very low (50 kg/cm2 ) cold crushing strength (C.C.S.), and can not be used in metalcase form.

  • Correct Answer
  • have better spalling resistance than chrome magnesite refractories. 


  • Refractory Technology problems


    Search Results


    • 1. Dolomite bricks have good resistance to attack by

    • Options
    • A. molten steel
    • B. iron oxide
    • C. lime slag
    • D. none of these
    • Discuss
    • 2. Pick out the wrong statement.

    • Options
    • A. Insulating refractories used in place of regular refractory bricks are usually called light weight refractories, and they have similar composition as heavy bricks.
    • B. Graphite refractories are also called plumbago refractories.
    • C. Superduty fireclay bricks correspond to a pyrometric cone equivalent of 26-28.
    • D. Calcined magnesite is also called dead burnt magnesite.
    • Discuss
    • 3. Ceramic recuperators used for waste heat recovery from high temperature flue gas going out of the furnace is made of

    • Options
    • A. fireclay
    • B. silicon carbide
    • C. corrundum
    • D. siliceous fireclay
    • Discuss
    • 4. Hot blast main (carrying air at 1000°C) in blast furnace are lined with __________ bricks.

    • Options
    • A. silica
    • B. fireclay
    • C. magnesite
    • D. zirconia
    • Discuss
    • 5. In panel test for spalling resistance, the average face temperature of panel assembly is maintained at __________ °C for 24 hours.

    • Options
    • A. 700
    • B. 1000
    • C. 1600
    • D. 2000
    • Discuss
    • 6. Silica bricks are never used for lining the

    • Options
    • A. beehive coke ovens.
    • B. by-product coke ovens.
    • C. dome of blast furnace stoves.
    • D. roof of open hearth furnace.
    • Discuss
    • 7. Pure oxide refractories are generally monocrystaliine in nature and are self bonded __________ bricks are generally used as moderator in nuclear reactors.

    • Options
    • A. Beryllia
    • B. Carborundum
    • C. Corundum
    • D. Thoria
    • Discuss
    • 8. Pick out the wrong statement.

    • Options
    • A. A ceramic material which becomes fluid upon heating and can be moulded in liquid/viscous state is termed s glass.
    • B. Ceramic materials do not undergo vitrification on heating.
    • C. Ceramic materials are brittle in nature.
    • D. Non-oxide ceramic materials generally act as a semi-conductor.
    • Discuss
    • 9. Faster rate of drying of moulded refractories results in high __________ of refractories.

    • Options
    • A. green strength
    • B. voids
    • C. shrinkage
    • D. both (b) and (c)
    • Discuss
    • 10. Which is a neutral refractory?

    • Options
    • A. Graphite
    • B. Magnesite chrome
    • C. Silica
    • D. Magnesia
    • Discuss


    Comments

    There are no comments.

Enter a new Comment