Discussion
Home ‣ Chemical Engineering ‣ Refractory Technology Comments
- Question
Carbon refractory blocks
Options- A. are wetted by molten iron.
- B. are used in the hearth of blast furnace.
- C. are acidic in nature.
- D. all (a), (b) and (c).
- Correct Answer
- are used in the hearth of blast furnace.
- 1. Periclase refractory contains mainly
Options- A. CaO
- B. MgO
- C. Al2O3
- D. SiO2 Discuss
- 2. High density refractory bricks have lower
Options- A. spalling resistance.
- B. thermal conductivity.
- C. fusion point.
- D. slag penetration resistance. Discuss
- 3. Tar bonded dolomite bricks
Options- A. are stored under controlled temperature & humidity to avoid hydration.
- B. are used in outer lining of L.D. converters.
- C. have poorer hydration resistance than pitch bonded bricks.
- D. all (a), (b) and (c) Discuss
- 4. Maximum safe working temperature for fireclay bricks is about __________ °C.
Options- A. 1150
- B. 1300
- C. 1450
- D. 1550 Discuss
- 5. Electrical resistor bars are made of
Options- A. silicon carbide
- B. alumina
- C. zirconia
- D. graphite Discuss
- 6. Fusion point of an acidic refractory material is
Options- A. increased by the addition of basic oxides.
- B. reduced by the addition of basic oxides.
- C. not affected by the addition of basic oxides.
- D. always more than 2500°C. Discuss
- 7. Machine moulding of dry mixture of refractories requires a pressure of the order of __________ kg/cm2.
Options- A. 10
- B. 100
- C. 500
- D. 1000 Discuss
- 8. Cold crushing strength of refractories depends upon its
Options- A. composition
- B. texture
- C. firing temperature
- D. all (a), (b) and (c) Discuss
- 9. Which refractory must have controlled atmosphere (temperature and humidity) for its safe storage?
Options- A. Tar bonded dolomite bricks
- B. Fireclay bricks
- C. Mullite bricks
- D. Magnesite bricks Discuss
- 10. Which is a basic refractory?
Options- A. Fireclay
- B. Silica
- C. Chrome magnesite
- D. None of these Discuss
Refractory Technology problems
Search Results
Correct Answer: MgO
Correct Answer: spalling resistance.
Correct Answer: all (a), (b) and (c)
Correct Answer: 1550
Correct Answer: silicon carbide
Correct Answer: reduced by the addition of basic oxides.
Correct Answer: 1000
Correct Answer: all (a), (b) and (c)
Correct Answer: Tar bonded dolomite bricks
Correct Answer: Chrome magnesite
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.