logo

CuriousTab

CuriousTab

Discussion


Home Chemical Engineering Process Equipment and Plant Design Comments

  • Question
  • Cylinderical shell thickness of rotary drier is generally __________ mm.


  • Options
  • A. 2-3
  • B. 18-22
  • C. 6-8
  • D. 12-15

  • Correct Answer
  • 6-8 


  • Process Equipment and Plant Design problems


    Search Results


    • 1. Tubes are fixed to the tube sheet (a thick circular metallic plate) by the method of tube rolling and brazing (non-removable) or ferrule connection (removable). Thickness of the tube, sheet is normally __________ the outside diameter of the tube but in no case it should be less than 22 mm (7/8").

    • Options
    • A. half
    • B. three fourth
    • C. equal to
    • D. 1.5 times
    • Discuss
    • 2. Scale up problem in design based on the similarity concept takes into account __________ similarity.

    • Options
    • A. geometrical
    • B. kinematic
    • C. dynamic
    • D. all (a), (b) and (c)
    • Discuss
    • 3. Liquid gradient over a tray can be minimised by

    • Options
    • A. providing a higher skirt clearance or a higher weir.
    • B. decreasing the number of rows of caps through which the liquid flows or by decreasing the velocity of liquid flow past the caps or by reducing the distance along the tray through which the liquid must flow.
    • C. using split flow, radial flow or cascade flow for column diameter large than 4 ft.
    • D. all (a), (b) and (c).
    • Discuss
    • 4. Pressure differential maintained across a continuous rotary vacuum filter is in the range of __________ mm Hg column.

    • Options
    • A. 50 to 100
    • B. 100 to 150
    • C. 250 to 500
    • D. 600 to 700
    • Discuss
    • 5. In a double pipe (concentric) heat exchanger, the hydraulic radius for heat transfer (for a fluid flowing through the annulus) would be

    • Options
    • A. same as that for fluid flow.
    • B. less than that for fluid flow.
    • C. more than that for fluid flow.
    • D. D2 - D1 (D1 and D2 are I.D. of inner and outer pipes respectively).
    • Discuss
    • 6. In nuclear reactions, __________ number is conserved.

    • Options
    • A. mass
    • B. atomic
    • C. both (a) & (b)
    • D. neither (a) nor (b)
    • Discuss
    • 7. Uranium Corporation of India Limited (UCIL) engaged in the mining & concentration of uranium ore is located at

    • Options
    • A. Alwaye (in Kerala)
    • B. Jadugoda (in Jharkhand)
    • C. Kalpakkam (in Tamilnadu)
    • D. Gopalpur coast (in Orissa)
    • Discuss
    • 8. Which of the following isotopes is not present in natural uranium?

    • Options
    • A. U-238
    • B. U-234
    • C. U-235
    • D. U-232
    • Discuss
    • 9. In a pressurised water reactor (PWR), the

    • Options
    • A. fuel is natural uranium and heavy water acts both as moderator & coolant.
    • B. coolant water boils in the core of the reactor.
    • C. coolant water is pressurised to prevent bulk boiling of water in the core.
    • D. use of moderator is not required.
    • Discuss
    • 10. Heavy water plant is not located at

    • Options
    • A. Talcher
    • B. Tuticorin
    • C. Ramagundam
    • D. Kota
    • Discuss


    Comments

    There are no comments.

Enter a new Comment