Discussion
Home ‣ Chemical Engineering ‣ Process Equipment and Plant Design Comments
- Question
The buckling tendency of compression members is always in the direction of the
Options- A. least radius of gyration.
- B. axis of the load.
- C. perpendicular to the axis of the load.
- D. none of these.
- Correct Answer
- least radius of gyration.
- 1. A 'rupture disc' is provided in chemical equipments as an accessory meant for
Options- A. relieving excess pressure.
- B. creating turbulence.
- C. enhancing mixing rate.
- D. avoiding vortex formation. Discuss
- 2. Removable connection of tubes to tube sheet is called
Options- A. ferrule
- B. socket
- C. nipple
- D. saddle Discuss
- 3. The average velocity in the tubes of a 1-4 heat exchanger is __________ times that in 1-1 heat exchanger having the same size & number of tubes and operated at same liquid flow rate.
Options- A. 2
- B. 1/2
- C. 4
- D. 1/4 Discuss
- 4. The minimum baffle height should be
Options- A. equal to the impeller diameter.
- B. twice the impeller diameter.
- C. twice the tank diameter.
- D. 3/4 of the tank height. Discuss
- 5. Seamless pipe is made
Options- A. from rolled strips formed into cylinders and seam-welded.
- B. by extrusion & casting into static and centrifugal molds.
- C. by forging a solid round, piercing it by simultaneously rotating & forcing it over a piercer point and further reducing it by rolling gas drawing.
- D. both (b) and (c). Discuss
- 6. Baffle spacing is generally __________ the I.D. of the shell.
Options- A. more than
- B. not greater than
- C. not less than one fifth of
- D. both (b) and (c) Discuss
- 7. Pick out the wrong statement pertaining to the design of the distillation column.
Options- A. Generally, a skirt clerance of 0.5" to 1.5' is recommended to prevent plugging of the slots by residue build up.
- B. The purpose of the slot is to disperse the gas into the liquid in the form of small bubbles.
- C. If sufficient slot area is not provided, the gas may pass through the skirt clearance.
- D. none of these. Discuss
- 8. Stress-strain diagram for low carbon steel/mild steel is shown below in the Fig.
The point 'A' on the Fig. represents the
Options- A. breaking stress
- B. ultimate stress
- C. elastic limit
- D. yield point Discuss
- 9. The thermal stress in a metallic bar does not depend upon the
Options- A. changes in temperature.
- B. cross-sectional area.
- C. both (a) and (b).
- D. neither (a) nor (b). Discuss
- 10. The function of manholes provided in the shell of a distillation column is to
Options- A. keep a check on the liquid gradient over the plate by direct visual observation.
- B. give access to the individual trays for cleaning, maintenance and installation.
- C. guard against foaming & entrainment by dumping antifoaming agent through it.
- D. all (a), (b) and (c). Discuss
Process Equipment and Plant Design problems
Search Results
Correct Answer: relieving excess pressure.
Correct Answer: ferrule
Correct Answer: 4
Correct Answer: twice the impeller diameter.
Correct Answer: both (b) and (c).
Correct Answer: both (b) and (c)
Correct Answer: none of these.
Correct Answer: elastic limit
Correct Answer: cross-sectional area.
Correct Answer: give access to the individual trays for cleaning, maintenance and installation.
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.