A 'rupture disc' is provided in chemical equipments as an accessory meant for re

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Chemical Engineering ‣ Process Equipment and Plant Design Comments

Question
A 'rupture disc' is provided in chemical equipments as an accessory meant for
Options
A. relieving excess pressure.
B. creating turbulence.
C. enhancing mixing rate.
D. avoiding vortex formation.

Correct Answer

relieving excess pressure.

Process Equipment and Plant Design problems

Search Results

2. The average velocity in the tubes of a 1-4 heat exchanger is __________ times that in 1-1 heat exchanger having the same size & number of tubes and operated at same liquid flow rate.
Options
A. 2
B. 1/2
C. 4
D. 1/4

4. Seamless pipe is made
Options
A. from rolled strips formed into cylinders and seam-welded.
B. by extrusion & casting into static and centrifugal molds.
C. by forging a solid round, piercing it by simultaneously rotating & forcing it over a piercer point and further reducing it by rolling gas drawing.
D. both (b) and (c).

6. The buckling tendency of compression members is always in the direction of the
Options
A. least radius of gyration.
B. axis of the load.
C. perpendicular to the axis of the load.
D. none of these.

8. Pick out the wrong statement pertaining to the design of the distillation column.
Options
A. Generally, a skirt clerance of 0.5" to 1.5' is recommended to prevent plugging of the slots by residue build up.
B. The purpose of the slot is to disperse the gas into the liquid in the form of small bubbles.
C. If sufficient slot area is not provided, the gas may pass through the skirt clearance.
D. none of these.

9. Stress-strain diagram for low carbon steel/mild steel is shown below in the Fig.

The point 'A' on the Fig. represents the
Options
A. breaking stress
B. ultimate stress
C. elastic limit
D. yield point

Comments

More in Chemical Engineering: