Discussion
Home ‣ Chemical Engineering ‣ Stoichiometry See What Others Are Saying!
- Question
The heats of vaporisation of CS2, C2H5OH &H2O are 26.8, 38.6 & 40.6 KJ/kg mole respectively. The order of decreasing inter-molecular forces in these liquids is
Options- A. H2O > C2H5OH > CS2
- B. CS2 > C2H5OH > H2O
- C. H2O > CS2 > C2H5OH
- D. CS2 > H2O > C2H5OH
- Correct Answer
- H2O > C2H5OH > CS2
- 1. Gizzlies are used for separating __________ solids.
Options- A. coarse
- B. fine
- C. any size
- D. none of these Discuss
- 2. Cyclones are used primarily for separating
Options- A. solids
- B. solids from fluids
- C. liquids
- D. solids from solids Discuss
- 3. In case of a revolving mill, wet grinding compared to dry grinding
Options- A. requires more energy.
- B. has less capacity.
- C. complicates handling & classification of the product.
- D. none of these. Discuss
- 4. There is practically no alternative/competitor to __________ in the beneficiation treatment of sulphide ores.
Options- A. classification
- B. tabling
- C. jigging
- D. froth floatation Discuss
- 5. A chain growth polymerisation reaction consists of three different types of reaction namely initiation reaction, propagation reaction & termination reaction. Chain growth polymerisation reaction is not involved in the manufacture of
Options- A. siloxane elastomers.
- B. polyamides.
- C. vinyl polymers.
- D. urea-formaldehyde resins. Discuss
- 6. One kg of saturated steam at 100°C and 1.01325 bar is contained in a rigid walled vessel. It lias a volume of 1.673 m3. It cools to 98°C ; the saturation pressure is 0.943 bar ; one kg of water vapour under these conditions has a volume of 1.789 m3. The latent heat of condensation (kJ/kg-1 ) under these conditions is
Options- A. 40732
- B. 2676
- C. 2263
- D. 540 Discuss
- 7. At room temperature, the product [H+] [OH-] in a solution is 10-14 moles/litre. If, [OH-] = 10-6 moles/litre, then the pH of the solution will be
Options- A. 6
- B. 8
- C. 10
- D. 12 Discuss
- 8. For turbulent flow (NRe > 2100) of low viscosity fluid (? > 20cp) in steel pipes, the optimum inside pipe diameter is given by(where, Q = fluid flow rate, ft3/sec.? = fluid density, lb/ft3 ? = fluid viscosity, centipoise Di = optimum inside pipe diameter, inches)
Options- A. Di, opt = 3.9 Q0.45 ?0.13
- B. Di, opt = 3.9 Q0.45 . ?0.95
- C. Di, opt = 4.7 Q0.36 . ?3.2?0.13
- D. Di, opt = 3 Q0.36 . ?0.88 Discuss
- 9. Gantt chart (or Bar chart) is helpful in
Options- A. efficient utilisation of manpower and machines.
- B. preparing production schedule.
- C. efficient despatching of products.
- D. inventory control. Discuss
- 10. Tar dolomite bricks are used in the
Options- A. basic Bessemer converter
- B. basic open hearth furnace
- C. electric furnaces
- D. all (a), (b) and (c) Discuss
More questions
Correct Answer: fine
Correct Answer: solids from fluids
Correct Answer: none of these.
Correct Answer: froth floatation
Correct Answer: urea-formaldehyde resins.
Correct Answer: 2263
Correct Answer: 8
Correct Answer: Di, opt = 3.9 Q0.45 ?0.13
Correct Answer: preparing production schedule.
Correct Answer: all (a), (b) and (c)
Comments
There are no comments.More in Chemical Engineering:
Chemical Engineering BasicsChemical Engineering Plant EconomicsChemical Engineering ThermodynamicsChemical ProcessChemical Reaction EngineeringEnvironmental EngineeringFertiliser TechnologyFluid MechanicsFuels and CombustionFurnace TechnologyHeat TransferMass TransferMaterials and ConstructionMechanical OperationsNuclear Power EngineeringPetroleum Refinery EngineeringPolymer TechnologyProcess Control and InstrumentationProcess Equipment and Plant DesignRefractory TechnologyStoichiometryProgramming
Copyright ©CuriousTab. All rights reserved.