For a ribbed slab clear spacing between ribs shall not be greater than 4.5 cm wi

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Civil Engineering ‣ RCC Structures Design Comments

Question
For a ribbed slab
Options
A. clear spacing between ribs shall not be greater than 4.5 cm
B. width of the rib shall not be less than 7.5 cm
C. overall depth of the slab shall not exceed four times the breadth of the rib
D. all the above.

Correct Answer

all the above.

RCC Structures Design problems

Search Results

1. In a prestressed member it is advisable to use
Options
A. low strength concrete only
B. high strength concrete only
C. low strength concrete but high tensile steel
D. high strength concrete and high tensile steel
E. high strength concrete but low tensile steel

2. If M_d and M_t are the maximum bending moments due to dead load and live load respectively and F is the total effective pressure, for a balanced design of a prestreseed concrete beam of steel, is
Options
A.
B.
C.
D.

3. Spacing of stirrups in a rectangular beam, is
Options
A. kept constant throughout the length
B. decreased towards the centre of the beam
C. increased at the ends
D. increased at the centre of the beam.

6. If the neutral axis of a T-beam is below the slab, the relationship between the flange width B, depth of neutral axis n, thickness of the slab ds, effective depth of the beam d, gross area of tensile steel A_t and the modular ratio m may be stated as
Options
A.
B.
C.
D. Bds(n - ds) = mAt(d - n)

7. If A is the sectional area of a prestressed rectangular beam provided with a tendon prestressed by a force P through its centroidal longitudinal axis, the compressive stress in concrete, is
Options
A.
B.
C.
D.
E.

8. A pre-stressed concrete member is preferred because
Options
A. its dimensions are not decided from the diagonal tensile stress
B. large size of long beams carrying large shear force need not be adopted
C. removal of cracks in the members due to shrinkage
D. all the above.

Comments

More in Civil Engineering: