Discussion
Home ‣ Civil Engineering ‣ Soil Mechanics and Foundation Engineering Comments
- Question
The soil which contains finest grain particles, is
Options- A. coarse sand
- B. fine sand
- C. silt
- D. clay.
- Correct Answer
- clay.
- 1. If ?0' and ?' represent initial and increased pressure ; e0 and e void ratios corresponding to initial and increased pressure ; and C0 the compression index (dimensionless), then, the virgin compression curve as expressed by Terzaghi empirical formula is
Options- A. e = e0 + Cc log10 ?'/?0'
- B. e = e0 - Cc log10 ?'/?0'
- C. e0 = e - Cc log10 ?'/?0'
- D. e0 = e + Cc log10 ?0'/?' Discuss
- 2. Water content of a soil sample is the difference of the weight of the given sample at the given temperature and the weight determined after drying it for 24 hours at temperature ranging from
Options- A. 80° to 90°C
- B. 90° to 95°C
- C. 95° to 100°C
- D. 103° to 105°C
- E. 105° to 110°C Discuss
- 3. The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to
Options- A. 30°
- B. 45°
- C. 60°
- D. 90° Discuss
- 4. The maximum load carried by a pile, when it continues to sink without further increase of load, is known as
Options- A. ultimate load carrying capacity
- B. ultimate bearing capacity
- C. ultimate bearing resistant
- D. all the above. Discuss
- 5. Pick up the correct statement from the following:
Options- A. The void space between the soil grains, is filled partly with air and partly with water
- B. In perfectly saturated soil, the voids are completely filled with water
- C. In dry soil, the voids are completely filled with air
- D. all the above. Discuss
- 6. According to the Indian Standards the specific gravity is the ratio of the unit weight of soil solids to that of water at a temperature of
Options- A. 17°C
- B. 23°C
- C. 27°C
- D. 30° Discuss
- 7. Number of piles required to support a column, is
Options- A. 1
- B. 2
- C. 3
- D. 4 Discuss
- 8. Determination of water content of a soil sample suspected to contain gypsum is made by drying the sample for longer period at a temperature not more than
Options- A. 60°C
- B. 80°C
- C. 100°C
- D. 110°C Discuss
- 9. If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is
Options- A. 0.2200 cm/sec
- B. 0.2225 cm/sec
- C. 0.2250 cm/sec
- D. 0.2275 cm/sec
- E. 0.2300 cm/sec Discuss
- 10. For determining the moisture content of a soil sample, the following data is available Weight of container = 260 g, Weight of soil sample and = 320 g container, Weight of soil sample (dried) and = 310 g container. The moisture content of the soil sample, is
Options- A. 15%
- B. 18%
- C. 20%
- D. 25% Discuss
Soil Mechanics and Foundation Engineering problems
Search Results
Correct Answer: e = e0 - Cc log10 ?'/?0'
Correct Answer: 105° to 110°C
Correct Answer: 45°
Correct Answer: all the above.
Correct Answer: all the above.
Correct Answer: 27°C
Correct Answer: 3
Correct Answer: 80°C
Correct Answer: 0.2275 cm/sec
Correct Answer: 20%
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.