Discussion
Home ‣ Mechanical Engineering ‣ Automobile Engineering Comments
- Question
The advantage of the fuel injection system over the carburetor system is
Options- A. improved fuel efficiency
- B. improved emission
- C. improved power output
- D. all of these
- Correct Answer
- all of these
- 1. The gear shift lever requires two separate motions to shift gears, and the first movement
Options- A. moves the synchronizer
- B. selects the synchronizer
- C. meshes the gears
- D. operates the clutch Discuss
- 2. In Diesel engines, the duration between the time of injection and the time of ignition is called
Options- A. spill cut-off
- B. delay period
- C. injection period
- D. ignition period Discuss
- 3. In a Diesel engine, the fuel is ignited by
Options- A. an electric spark
- B. the heat of compression
- C. the hot exhaust
- D. none of these Discuss
- 4. The negative terminal post on the top of a battery is
Options- A. smaller than the positive terminal post
- B. larger than the positive terminal post
- C. of the same size as the positive terminal post
- D. none of these Discuss
- 5. Which one of the following statements correctly describes the construction of a planetary gear type differential?
Options- A. The six planetary pinions rotate in constant mesh with the internal gears.
- B. One drive shaft is splined to the central gear and the other to the planetary gear.
- C. Each planetary pinion gear meshes with both the central gear and the internal gear.
- D. The internal gear is fixed to the planetary gear. Discuss
- 6. In a four stroke engine for each crankshaft revolution, the camshaft revolves
Options- A. one-half turn
- B. one turn
- C. two turns
- D. four turns Discuss
- 7. Cushioning springs in clutch plate reduces
Options- A. vehicle speed
- B. torsional vibrations
- C. jerky starts
- D. none of these Discuss
- 8. The clutch is located between the transmission and the
Options- A. engine
- B. rear axle
- C. propeller shaft
- D. differential Discuss
- 9. The specific gravity of petrol is about
Options- A. 0.75
- B. 0.85
- C. 0.95
- D. 1.25 Discuss
- 10. The condition that results in large quantities of HC emission is
Options- A. high temperature combustion
- B. incomplete combustion
- C. low temperature combustion
- D. high atmospheric temperature combustion Discuss
Automobile Engineering problems
Search Results
Correct Answer: selects the synchronizer
Correct Answer: delay period
Correct Answer: the heat of compression
Correct Answer: smaller than the positive terminal post
Correct Answer: One drive shaft is splined to the central gear and the other to the planetary gear.
Correct Answer: one-half turn
Correct Answer: jerky starts
Correct Answer: engine
Correct Answer: 0.75
Correct Answer: incomplete combustion
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.