logo

CuriousTab

CuriousTab

Discussion


Home Mechanical Engineering Automobile Engineering Comments

  • Question
  • Which of the following oil is more viscous?


  • Options
  • A. SAE 30
  • B. SAE 40
  • C. SAE 70
  • D. SAE 80

  • Correct Answer
  • SAE 80 


  • Automobile Engineering problems


    Search Results


    • 1. If the valve clearances are excessively large, the problem that can arise is

    • Options
    • A. overheating of the engine
    • B. incomplete valve closure
    • C. fouling of spark plug by gasoline
    • D. none of these
    • Discuss
    • 2. In a four wheel drive (4WD), the number of gear boxes are

    • Options
    • A. 1
    • B. 2
    • C. 3
    • D. 4
    • Discuss
    • 3. The engine oil level should be checked

    • Options
    • A. immediately after the ignition switch is turned off
    • B. while the engine is running
    • C. a few minutes after the ignition switch is turned off
    • D. while the engine is running at high-idle speed
    • Discuss
    • 4. The crankshaft of a typical in-line four cylinder engine has __________ balance weights.

    • Options
    • A. 12
    • B. 4
    • C. 16
    • D. 8
    • Discuss
    • 5. The specific gravity of acid in a fully charged battery is generally

    • Options
    • A. 1.00
    • B. 1.28
    • C. 1.82
    • D. 2.81
    • Discuss
    • 6. A heat treated glass generally used in automobiles bursts into __________ upon cracking,

    • Options
    • A. sharp edged fragments
    • B. small particles
    • Discuss
    • 7. A maintenance free battery

    • Options
    • A. has lead-antimony plate grid
    • B. has lead-calcium plate grid
    • C. does not contain acid
    • D. does not contain water
    • Discuss
    • 8. When the vehicle is at rest, the clutch is in engaged position.

    • Options
    • A. Correct
    • B. Incorrect
    • Discuss
    • 9. A petrol engine of a car develops 125 N-m torque at 2700 r.p.m. The car is driven in second gear having gear ratio of 1.75. The final drive ratio is 4.11. If the overall transmission efficiency is 90%, then the torque available at the driving wheels is

    • Options
    • A. 8.091 N-m
    • B. 80.91 N-m
    • C. 809.1 N-m
    • D. 8091 N-m
    • Discuss
    • 10. Toe-in ensures parallel rolling of the wheel thus stabilizing steering in addition to preventing both sides slipping and excessive tyre wear.

    • Options
    • A. Correct
    • B. Incorrect
    • Discuss


    Comments

    There are no comments.

Enter a new Comment