logo

CuriousTab

CuriousTab

Discussion


Home Mechanical Engineering Automobile Engineering Comments

  • Question
  • The main merit of a multi-cylinder type cylinder sleeve is


  • Options
  • A. smaller engine dimensions
  • B. better cooling efficiency
  • C. high rigidity
  • D. none of these

  • Correct Answer
  • smaller engine dimensions 


  • Automobile Engineering problems


    Search Results


    • 1. The engine's idling speed will increase by a slight degree immediately after a cold engine has been started. It will drop as the engine warms up. and it will eventually reach the standard level.

    • Options
    • A. True
    • B. False
    • Discuss
    • 2. The main cause for the change in engine oil viscosity is

    • Options
    • A. humidity
    • B. temperature
    • C. vibration
    • D. contamination
    • Discuss
    • 3. Engine misfiring is likely to result from

    • Options
    • A. spark plug gap too small
    • B. spark plug gap too wide
    • C. vapour lock in the fuel only
    • D. incorrect fuel air mixture
    • Discuss
    • 4. The instrument used to check specific gravity of acid in a battery is

    • Options
    • A. hydrometer
    • B. hygrometer
    • C. anemometer
    • D. multimeter
    • Discuss
    • 5. The connecting rod connects the piston and the

    • Options
    • A. cylinder head
    • B. cylinder block
    • C. camshaft
    • D. crankshaft
    • Discuss
    • 6. The connecting rod lower end is connected to the relevant __________ of crankshaft.

    • Options
    • A. big end
    • B. crank arm
    • C. journal
    • D. small end
    • Discuss
    • 7. Which of the following bulb in a car will have the least wattage?

    • Options
    • A. Head light bulb
    • B. Stop light bulb
    • C. Parking light bulb
    • D. Ignition warning bulb
    • Discuss
    • 8. In a square type engine

    • Options
    • A. geometrical shape is square
    • B. diameter and length of piston are same
    • C. two cylinders are placed horizontal and two vertical
    • D. stroke length and cylinder bore are same
    • Discuss
    • 9. The fuel pump in the programmed fuel injection (PFI) system is located

    • Options
    • A. between the fuel-filler pipe and fuel tank
    • B. in the fuel tank
    • C. on the distributor mounting in the engine compartment
    • D. on the engine compartment bulkhead
    • Discuss
    • 10. The basic purpose of tyre rotation on automobiles is to

    • Options
    • A. avoid ply separation
    • B. equalize wear
    • C. get better ride
    • D. none of these
    • Discuss


    Comments

    There are no comments.

Enter a new Comment