Discussion
Home ‣ Mechanical Engineering ‣ Workshop Technology Comments
- Question
The brass and bronze are welded by __________ flame.
Options- A. neutral
- B. oxidising
- C. carburising
- D. all of these
- Correct Answer
- oxidising
- 1. For gas welding, the pressure desired at the welding torch for oxygen is
Options- A. 7 to 103 kN/m2
- B. 70 to 280 kN/m2
- C. 280 to 560 kN/m2
- D. 560 to 840 kN/m2 Discuss
- 2. The adhesiveness is the property of a sand due to which
Options- A. it evolves a great amount of steam and other gases
- B. the sand grains stick together
- C. it cling to the sides of a moulding box
- D. none of these Discuss
- 3. The instrument used to measure external and internal diameter of shafts, thickness of parts and depth of holes, is
Options- A. outside micrometer
- B. inside micrometer
- C. depth gauge micrometer
- D. vernier caliper Discuss
- 4. In a simple die
Options- A. two or more operations are performed simultaneously at the single stroke of the ram
- B. two or more cutting operations are performed at one station of the press in every stroke of the ram
- C. both cutting and non-cutting operations are performed at one station of the press in every stroke of the ram
- D. none of the above Discuss
- 5. The operation of producing cup shaped parts from flat sheet metal blanks by bending and plastic flow of metal, is known as
Options- A. drawing
- B. squeezing
- C. coining
- D. planishing Discuss
- 6. When more volume of acetylene and less volume of oxygen is supplied, then a __________ flame is obtained.
Options- A. neutral
- B. oxidising
- C. carburising Discuss
- 7. A stripper-plate machine is used to draw the pattern from the mould.
Options- A. Yes
- B. No Discuss
- 8. The anti-knock property of compression ignition engine fuel can be improved by adding
Options- A. tetraethyl lead
- B. trimethyl pentane
- C. amyl nitrate
- D. hexadecane Discuss
- 9. The driveshafts are connected to the differential and wheel hubs through universal joints because the universal joints
Options- A. absorb the vibrations transferred from the surface of the road
- B. compensate for variations in the relative positions of the differential and the wheels which result from bumpy road surfaces or other similar driving conditions.
- C. absorb any difference in speed between the left and right wheels when the vehicle is turning
- D. none of the above Discuss
- 10. When the brake pedal free play is less than the specified value, then the
Options- A. brake drags
- B. brake fades
- C. vapour locking occurs in the brake lines
- D. antilock braking system malfunctions Discuss
Workshop Technology problems
Search Results
Correct Answer: 70 to 280 kN/m2
Correct Answer: it cling to the sides of a moulding box
Correct Answer: vernier caliper
Correct Answer: none of the above
Correct Answer: drawing
Correct Answer: carburising
Correct Answer: Yes
Correct Answer: amyl nitrate
Correct Answer: compensate for variations in the relative positions of the differential and the wheels which result from bumpy road surfaces or other similar driving conditions.
Correct Answer: brake drags
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.