Discussion
Home ‣ Mechanical Engineering ‣ Workshop Technology Comments
- Question
The surface to be left unmachined is marked on the pattern by
Options- A. red colour
- B. yellow colour
- C. black colour
- D. blue colour
- Correct Answer
- black colour
- 1. In order to ram the sand harder at the back of the mould and softer on the pattern face, a __________ is used.
Options- A. sand slinger
- B. squeezing machine
- C. jolt machine
- D. stripper plate machine Discuss
- 2. The temperature of the inner luminous cone of neutral flame is about
Options- A. 1000° C
- B. 1250° C
- C. 2100° C
- D. 3200° C Discuss
- 3. The oxidising flame is similar to neutral flame but the inner cone is less luminous and shorter.
Options- A. Yes
- B. No Discuss
- 4. In order to produce uniform packing of sand in the moulds, a __________ is used.
Options- A. sand slinger
- B. squeezing machine
- C. jolt machine
- D. stripper plate machine Discuss
- 5. A pattern is used to make the mould cavity for pouring the molten metal for casting.
Options- A. Yes
- B. No Discuss
- 6. The temperature produced by oxy-hydrogen flame is about
Options- A. 1800° C
- B. 2100° C
- C. 2400° C
- D. 3200° C Discuss
- 7. In blanking operation, the clearance is provided on
Options- A. punch
- B. die
- C. half on the punch and half on the die
- D. either on punch or die depending upon designer's choice Discuss
- 8. The operation of giving impressions of figures, letters or designs on sheet metal parts, is known as embossing.
Options- A. Correct
- B. Incorrect Discuss
- 9. In arc welding, the temperature of heat produced by the electric arc is of the order of
Options- A. 3000° C to 4000° C
- B. 4000° C to 5000° C
- C. 5000° C to 6000° C
- D. 6000° C to 7000° C Discuss
- 10. A hacksaw blade is specified by its
Options- A. length
- B. material
- C. width
- D. number of teeth Discuss
Workshop Technology problems
Search Results
Correct Answer: squeezing machine
Correct Answer: 3200° C
Correct Answer: Yes
Correct Answer: sand slinger
Correct Answer: Yes
Correct Answer: 2400° C
Correct Answer: punch
Correct Answer: Correct
Correct Answer: 6000° C to 7000° C
Correct Answer: length
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.