Discussion
Home ‣ Mechanical Engineering ‣ Engineering Materials Comments
- Question
Hardness of steel is increased by adding sulphur, lead and phosphorus.
Options- A. Yes
- B. No
- Correct Answer
- No
- 1. The iron ore mostly used for the production of pig iron is
Options- A. magnetite
- B. haematite
- C. limonite
- D. siderite Discuss
- 2. According to Indian standard specifications, cast iron designated by 'FG 150' means
Options- A. white cast iron with B.H.N. 150
- B. white cast iron with 150 MPa as minimum compressive strength
- C. grey cast iron with B.H.N. 150
- D. grey cast iron with 150 MPa as minimum tensile strength Discuss
- 3. Monel metal contains
Options- A. 65% nickel, 15% chromium and 20% iron
- B. 68% nickel, 29% copper and 3% other constituents
- C. 80% nickel and 20% chromium
- D. 80% nickel, 14% chromium and 6% iron Discuss
- 4. The maximum internal diameter of a blast furnace is about
Options- A. 3 m
- B. 6 m
- C. 9 m
- D. 12 m Discuss
- 5. When a low carbon steel is heated upto lower critical temperature,
Options- A. there is no change in grain size
- B. the average grain size is a minimum
- C. the grain size increases very rapidly
- D. the grain size first increases and then decreases very rapidly Discuss
- 6. In a close packed hexagonal space lattice, there are
Options- A. nine atoms out of which eight atoms are located at the corners of the cube and one atom at its centre
- B. twelve atoms, all of which are located at the twelve corners of a hexagonal prism
- C. fourteen atoms out of which eight atoms are located at the coners of the cube and six atoms at the centres of six faces
- D. none of the above Discuss
- 7. The process of inducing carbon to __________ carbon steels in order to give it a hard surface is known as carburising.
Options- A. low
- B. medium
- C. high Discuss
- 8. Admirality gun metal contains
Options- A. 60% copper, 35% zinc and 5% manganese
- B. 76% copper, 20% silicon and 4% zinc
- C. 82% copper, 12% zinc and 6% manganese
- D. 88% copper, 10% tin and 2% zinc Discuss
- 9. The addition of manganese to aluminium improves corrosion resistance.
Options- A. Correct
- B. Incorrect Discuss
- 10. Chilled cast iron is produced
Options- A. by adding magnesium to molten cast iron
- B. by quick cooling of molten cast iron
- C. from white cast iron by annealing process
- D. none of these Discuss
Engineering Materials problems
Search Results
Correct Answer: haematite
Correct Answer: grey cast iron with 150 MPa as minimum tensile strength
Correct Answer: 68% nickel, 29% copper and 3% other constituents
Correct Answer: 9 m
Correct Answer: there is no change in grain size
Correct Answer: none of the above
Correct Answer: low
Correct Answer: 88% copper, 10% tin and 2% zinc
Correct Answer: Correct
Correct Answer: by quick cooling of molten cast iron
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.