Discussion
Home ‣ Mechanical Engineering ‣ Engineering Materials Comments
- Question
Nickel when added to copper improves
Options- A. machinability
- B. hardness
- C. hardness and strength
- D. strength and ductility
- Correct Answer
- hardness
- 1. When filing or machining cast iron makes our hands black, then it shows that __________ is present in cast iron.
Options- A. cementite
- B. free graphite Discuss
- 2. The percentage carbon content in wrought iron is about
Options- A. 0.02
- B. 0.1
- C. 02
- D. 0.4 Discuss
- 3. The silicon steel is widely used for
Options- A. connecting rods
- B. cutting tools
- C. generators and transformers in the form of laminated cores
- D. motor car crankshafts Discuss
- 4. Ball bearings are, usually, made from
Options- A. low carbon steel
- B. high carbon steel
- C. medium carbon steel
- D. chrome steel Discuss
- 5. Eutectoid reaction occurs at
Options- A. 600°C
- B. 723°C
- C. 1147°C
- D. 1493°C Discuss
- 6. The alloying element which reduces the formation of iron sulphide in steel is
Options- A. chromium
- B. nickel
- C. vanadium
- D. manganese Discuss
- 7. Babbit metal is a
Options- A. lead-base alloy
- B. copper-base alloy
- C. tin-base alloy
- D. cadmium-base alloy Discuss
- 8. The ratio of the volume occupied by the atoms to the total volume of the unit cell is called
Options- A. coordination number
- B. atomic packing factor
- C. space lattice
- D. none of these Discuss
- 9. In a hardening process, the hypo-eutectoid steel is
Options- A. heated from 30° C to 50° C above the upper critical temperature and then cooled in still air
- B. heated from 30° C to 50° C above the upper critical temperature and then cooled suddenly in a suitable cooling medium
- C. heated from 30° C to 50° C above the upper critical temperature and then cooled slowly in the furnace
- D. heated below or close to the lower critical temperature and then cooled slowly Discuss
- 10. When a low carbon steel is heated upto lower critical temperature,
Options- A. there is no change in grain size
- B. the average grain size is a minimum
- C. the grain size increases very rapidly
- D. the grain size first increases and then decreases very rapidly Discuss
Engineering Materials problems
Search Results
Correct Answer: free graphite
Correct Answer: 0.02
Correct Answer: generators and transformers in the form of laminated cores
Correct Answer: chrome steel
Correct Answer: 723°C
Correct Answer: manganese
Correct Answer: tin-base alloy
Correct Answer: atomic packing factor
Correct Answer: heated from 30° C to 50° C above the upper critical temperature and then cooled suddenly in a suitable cooling medium
Correct Answer: there is no change in grain size
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.