Discussion
Home ‣ Mechanical Engineering ‣ Engineering Materials Comments
- Question
Connecting rod is, usually, made from
Options- A. low carbon steel
- B. high carbon steel
- C. medium carbon steel
- D. high speed steel
- Correct Answer
- medium carbon steel
- 1. According to Indian standard specifications, a plain carbon steel designated by 40 C8 means that the carbon content is
Options- A. 0.04%
- B. 0.35 to 0.45%
- C. 0.4 to 0.6%
- D. 0.6 to 0.8% Discuss
- 2. Which of the following property is desirable in parts subjected to shock and impact loads?
Options- A. Strength
- B. Stiffness
- C. Brittleness
- D. Toughness Discuss
- 3. Which of the following impurity in cast iron promotes graphite nodule formation and increases the fluidity of the molten metal?
Options- A. Silicon
- B. Sulphur
- C. Manganese
- D. Phosphorus Discuss
- 4. Wrought iron
Options- A. is a ductile material
- B. can be easily forged or welded
- C. cannot stand sudden and excessive shocks
- D. all of these Discuss
- 5. Gamma-iron occurs between the temperature range of
Options- A. 400°C to 600°C
- B. 600°C to 900°C
- C. 900°C to 1400°C
- D. 1400°C to 1530°C Discuss
- 6. When a steel containing less than 0.8% carbon is cooled slowly from temperatures above or within the critical range, it consists of
Options- A. mainly ferrite
- B. mainly pearlite
- C. ferrite and pearlite
- D. pearlite and cementite Discuss
- 7. Beryllium bronze contains
Options- A. 60% copper and 40% beryllium
- B. 80% copper and 20% beryllium
- C. 97.75% copper and 2.25% beryllium
- D. 99% copper and 1% beryllium Discuss
- 8. In a body centred cubic space lattice, there are nine atoms out of which eight atoms are located at the corners of the cube and one atom at its centre.
Options- A. Yes
- B. No Discuss
- 9. The addition of copper to aluminium possesses maximum strength after heat treatment and age-hardening
Options- A. Correct
- B. Incorrect Discuss
- 10. Sulphur in cast iron
Options- A. makes the iron soft and easily machinable
- B. increases hardness and brittleness
- C. makes the iron white and hard
- D. aids fusibility and fluidity Discuss
Engineering Materials problems
Search Results
Correct Answer: 0.35 to 0.45%
Correct Answer: Toughness
Correct Answer: Silicon
Correct Answer: all of these
Correct Answer: 900°C to 1400°C
Correct Answer: ferrite and pearlite
Correct Answer: 97.75% copper and 2.25% beryllium
Correct Answer: Yes
Correct Answer: Correct
Correct Answer: increases hardness and brittleness
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.