Discussion
Home ‣ Mechanical Engineering ‣ Engineering Materials Comments
- Question
For a steel containing 0.8% carbon
Options- A. there is no critical point
- B. there is only one critical point
- C. there are two critical points
- D. there can be any number of critical points
- Correct Answer
- there is only one critical point
- 1. Cast iron is a ductile material.
Options- A. Correct
- B. Incorrect Discuss
- 2. Which of the following statement is incorrect about duralumin?
Options- A. It is prone to age hardening
- B. It can be forged
- C. It has good machining properties
- D. It is lighter than pure aluminium Discuss
- 3. The bond formed by transferring electrons from one atom to another is called
Options- A. ionic bond
- B. covalent bond
- C. metallic bond
- D. none of these Discuss
- 4. Grey cast iron is __________ than white cast iron.
Options- A. softer
- B. harder Discuss
- 5. Cementite consist of
Options- A. 13% carbon and 87% ferrite
- B. 13% cementite and 87% ferrite
- C. 13% ferrite and 87% cementite
- D. 6.67% carbon and 93.33% iron Discuss
- 6. The property of a material which enables it to retain the deformation permanently, is called
Options- A. brittleness
- B. ductility
- C. malleability
- D. plasticity Discuss
- 7. The portion of the blast furnace below its widest cross-section is called
Options- A. hearth
- B. stack
- C. bosh
- D. throat Discuss
- 8. Pearlite is a combination of 87% ferrite and 13% cementite.
Options- A. Yes
- B. No Discuss
- 9. In spheroidising process, the steel is
Options- A. heated below the lower critical temperature and then cooled slowly
- B. heated upto the lower critical temperature and then cooled in still air
- C. heated slightly above the lower critical temperature and then cooled slowly to a temperature of 600°C
- D. none of the above Discuss
- 10. Aluminium has low density and addition of silicon improves its fluidity and therefore, its castability.
Options- A. Correct
- B. Incorrect Discuss
Engineering Materials problems
Search Results
Correct Answer: Incorrect
Correct Answer: It is lighter than pure aluminium
Correct Answer: ionic bond
Correct Answer: softer
Correct Answer: 6.67% carbon and 93.33% iron
Correct Answer: plasticity
Correct Answer: bosh
Correct Answer: Yes
Correct Answer: heated slightly above the lower critical temperature and then cooled slowly to a temperature of 600°C
Correct Answer: Correct
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.