Discussion
Home ‣ Mechanical Engineering ‣ Engineering Materials Comments
- Question
Duralumin contains
Options- A. 3.5 to 4.5% copper, 0.4 to 0.7% magnesium, 0.4 to 0.7% manganese and rest aluminium
- B. 3.5 to 4.5% copper, 1.2 to 1.7% managanese, 1.8 to 2.3% nickel, 0.6% each of silicon, magnesium and iron, and rest aluminium
- C. 4 to 4.5% magnesium, 3 to 4% copper and rest aluminium
- D. 5 to 6% tin, 2 to 3% copper and rest aluminium
- Correct Answer
- 3.5 to 4.5% copper, 0.4 to 0.7% magnesium, 0.4 to 0.7% manganese and rest aluminium
- 1. Duralumin has better strength than Y-alloy at high temperature.
Options- A. True
- B. False Discuss
- 2. Normalising of steel is done to
Options- A. refine the grain structure
- B. remove strains caused by cold working
- C. remove dislocations caused in the internal structuure due to hot working
- D. all of the above Discuss
- 3. Y-alloy contains
Options- A. 3.5 to 4.5% copper, 0.4 to 0.7% magnesium, 0.4 to 0.7% manganese and rest aluminium
- B. 3.5 to 4.5% copper, 1.2 to 1.7% manganese, 1.8 to 2.3% nickel, 0.6% each of silicon, magnesium and iron, and rest aluminium
- C. 4 to 4.5% magnesium, 3 to 4% copper and rest aluminium
- D. 5 to 6% tin, 2 to 3% copper and rest aluminium Discuss
- 4. The stiffness is the ability of a material to resist deformation under stress.
Options- A. True
- B. False Discuss
- 5. The presence of hydrogen in steel causes
Options- A. reduced neutron absorption cross-section
- B. improved weldability
- C. embrittlement
- D. corrosion resistance Discuss
- 6. The steel scrap added in the charge of cupola controls the grade of cast iron produced.
Options- A. Correct
- B. Incorrect Discuss
- 7. A steel containing 12 to 14% chromium and 0.12 to 0.35% carbon is called martensitic stainless steel.
Options- A. True
- B. False Discuss
- 8. White cast iron has
Options- A. carbon in the form of carbide
- B. low tensile strength
- C. high compressive strength
- D. all of these Discuss
- 9. Polyvinylchloride (PVC) is a __________ material.
Options- A. thermoplastic
- B. thermosetting Discuss
- 10. Tin base white metals are used where the bearings are subjected to
Options- A. large surface wear
- B. elevated temperatures
- C. light load and pressure
- D. high pressure and load Discuss
Engineering Materials problems
Search Results
Correct Answer: False
Correct Answer: all of the above
Correct Answer: 3.5 to 4.5% copper, 1.2 to 1.7% manganese, 1.8 to 2.3% nickel, 0.6% each of silicon, magnesium and iron, and rest aluminium
Correct Answer: True
Correct Answer: embrittlement
Correct Answer: Correct
Correct Answer: True
Correct Answer: all of these
Correct Answer: thermoplastic
Correct Answer: large surface wear
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.