Discussion
Home ‣ Mechanical Engineering ‣ Engineering Materials Comments
- Question
The stiffness is the ability of a material to resist deformation under stress.
Options- A. True
- B. False
- Correct Answer
- True
- 1. The presence of hydrogen in steel causes
Options- A. reduced neutron absorption cross-section
- B. improved weldability
- C. embrittlement
- D. corrosion resistance Discuss
- 2. A steel with carbon __________ is known as hypo-eutectoid steel.
Options- A. 0.8%
- B. below 0.8%
- C. above 0.8% Discuss
- 3. The charge of the blast furnace consists of
Options- A. calcined ore (8 parts ), coke (4 parts) and limestone (1 part)
- B. calcined ore (4 parts), coke (1 part) and limestone (8 parts)
- C. calcined ore (1 part), coke (8 part) and limestone (4 parts)
- D. calcined ore, coke and limestone all in equal parts Discuss
- 4. An alloy of copper, tin and zinc is known as
Options- A. brass
- B. bronze
- C. gun metal
- D. muntz metal Discuss
- 5. Iron-carbon alloys containing carbon __________ 4.3% are known as hyper-eutectic cast irons.
Options- A. equal to
- B. less than
- C. more than Discuss
- 6. Y-alloy contains
Options- A. 3.5 to 4.5% copper, 0.4 to 0.7% magnesium, 0.4 to 0.7% manganese and rest aluminium
- B. 3.5 to 4.5% copper, 1.2 to 1.7% manganese, 1.8 to 2.3% nickel, 0.6% each of silicon, magnesium and iron, and rest aluminium
- C. 4 to 4.5% magnesium, 3 to 4% copper and rest aluminium
- D. 5 to 6% tin, 2 to 3% copper and rest aluminium Discuss
- 7. Normalising of steel is done to
Options- A. refine the grain structure
- B. remove strains caused by cold working
- C. remove dislocations caused in the internal structuure due to hot working
- D. all of the above Discuss
- 8. Duralumin has better strength than Y-alloy at high temperature.
Options- A. True
- B. False Discuss
- 9. Duralumin contains
Options- A. 3.5 to 4.5% copper, 0.4 to 0.7% magnesium, 0.4 to 0.7% manganese and rest aluminium
- B. 3.5 to 4.5% copper, 1.2 to 1.7% managanese, 1.8 to 2.3% nickel, 0.6% each of silicon, magnesium and iron, and rest aluminium
- C. 4 to 4.5% magnesium, 3 to 4% copper and rest aluminium
- D. 5 to 6% tin, 2 to 3% copper and rest aluminium Discuss
- 10. The steel scrap added in the charge of cupola controls the grade of cast iron produced.
Options- A. Correct
- B. Incorrect Discuss
Engineering Materials problems
Search Results
Correct Answer: embrittlement
Correct Answer: below 0.8%
Correct Answer: calcined ore (8 parts ), coke (4 parts) and limestone (1 part)
Correct Answer: gun metal
Correct Answer: more than
Correct Answer: 3.5 to 4.5% copper, 1.2 to 1.7% manganese, 1.8 to 2.3% nickel, 0.6% each of silicon, magnesium and iron, and rest aluminium
Correct Answer: all of the above
Correct Answer: False
Correct Answer: 3.5 to 4.5% copper, 0.4 to 0.7% magnesium, 0.4 to 0.7% manganese and rest aluminium
Correct Answer: Correct
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.