Discussion
Home ‣ Mechanical Engineering ‣ Engineering Materials Comments
- Question
Cast iron is used in those parts which are subjected to shocks.
Options- A. Correct
- B. Incorrect
- Correct Answer
- Incorrect
- 1. When a medium carbon steel is heated to coarsening temperature,
Options- A. there is no change in grain size
- B. the average grain size is a minimum
- C. the grain size increases very rapidly
- D. the grain size first increases and then decreases very rapidly Discuss
- 2. Age hardening is related to
Options- A. duralumin
- B. brass
- C. copper
- D. silver Discuss
- 3. According to Indian standard specifications, SG 400/15 means
Options- A. spheroidal graphite cast iron with B.H.N. 400 and minimum tensile strength 15 MPa
- B. spheroidal graphite cast iron with minimum tensile strength 400 MPa and 15 percent elongation
- C. spheroidal graphite cast iron with minimum compressive strength 400 MPa and 15 percent reduction in area
- D. none of the above Discuss
- 4. The alloy, mainly used for corrosion resistance in stainless steels is
Options- A. silicon
- B. manganese
- C. carbon
- D. chromium Discuss
- 5. When a steel containing __________ 0.8% carbon is cooled slowly below the lower critical point, it consists of ferrite and pearlite.
Options- A. equal to
- B. less than
- C. more than Discuss
- 6. Delta-iron occurs between the temperature range of
Options- A. 400°C to 600°C
- B. 600°C to 900°C
- C. 900°C to 1400°C
- D. 1400°C to 1530°C Discuss
- 7. A steel containing 16 to 18% chromium and about 0.12% carbon is called
Options- A. ferritic stainless steel
- B. austenitic stainless steel
- C. martensitic stainless steel
- D. nickel steel Discuss
- 8. Which of the following metal is used in making electrical resistance wire for electric furnaces and heating elements?
Options- A. Babbit metal
- B. Monel metal
- C. Nichrome
- D. Phosphor bronze Discuss
- 9. A coarse grained steel
Options- A. is less tough and has a greater tendency to distort during heat treatment
- B. is more ductile and has a less tendency to distort during heat treatment
- C. is less tough and has a less tendency to distort during heat treatment
- D. is more ductile and has a greater tendency to distort during heat treatment Discuss
- 10. In a unit cell of close packed hexagonal space lattice, there are twenty four atoms.
Options- A. Correct
- B. Incorrect Discuss
Engineering Materials problems
Search Results
Correct Answer: the grain size increases very rapidly
Correct Answer: duralumin
Correct Answer: spheroidal graphite cast iron with minimum tensile strength 400 MPa and 15 percent elongation
Correct Answer: chromium
Correct Answer: less than
Correct Answer: 1400°C to 1530°C
Correct Answer: ferritic stainless steel
Correct Answer: Nichrome
Correct Answer: is less tough and has a greater tendency to distort during heat treatment
Correct Answer: Incorrect
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.