Discussion
Home ‣ Mechanical Engineering ‣ Engineering Materials Comments
- Question
The austenite is a solid solution of carbon or iron carbide in gamma-iron.
Options- A. Correct
- B. Incorrect
- Correct Answer
- Correct
- 1. Blast furnace is used to produce
Options- A. pig iron
- B. cast iron
- C. wrought iron
- D. steel Discuss
- 2. Bronze is an alloy of
Options- A. copper and zinc
- B. copper and tin
- C. copper, tin and zinc
- D. none of these Discuss
- 3. In induction hardening, the depth of hardening is controlled by controlling the voltage.
Options- A. Correct
- B. Incorrect Discuss
- 4. When elements like nickel, chromium, copper and molybdenum are added to the molten cast iron, it produces
Options- A. white cast iron
- B. nodular cast iron
- C. malleable cast iron
- D. alloy cast iron Discuss
- 5. The strength is the ability of a material to resist
Options- A. deformation under stress
- B. externally applied forces with breakdown or yielding
- C. fracture due to high impact loads
- D. none of these Discuss
- 6. Cartidge brass can be
Options- A. cold rolled into sheets
- B. drawn into wires
- C. formed into tube
- D. any one of these Discuss
- 7. In normalising process, the hypo-eutectiod steel is heated from 30° C to 50° C above the upper critical temperature and then cooled in still air.
Options- A. True
- B. False Discuss
- 8. In flame hardening, oxy-acetylene flame is used.
Options- A. Yes
- B. No Discuss
- 9. In low carbon steels, presence of small quantities of sulphur improves
Options- A. weldability
- B. formability
- C. machinability
- D. hardenability Discuss
- 10. Phosphorus is added in low carbon steels to raise its yield point.
Options- A. True
- B. False Discuss
Engineering Materials problems
Search Results
Correct Answer: pig iron
Correct Answer: copper and tin
Correct Answer: Correct
Correct Answer: alloy cast iron
Correct Answer: externally applied forces with breakdown or yielding
Correct Answer: any one of these
Correct Answer: True
Correct Answer: Yes
Correct Answer: machinability
Correct Answer: True
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.