Discussion
Home ‣ Mechanical Engineering ‣ Engineering Materials Comments
- Question
When elements like nickel, chromium, copper and molybdenum are added to the molten cast iron, it produces
Options- A. white cast iron
- B. nodular cast iron
- C. malleable cast iron
- D. alloy cast iron
- Correct Answer
- alloy cast iron
- 1. The strength is the ability of a material to resist
Options- A. deformation under stress
- B. externally applied forces with breakdown or yielding
- C. fracture due to high impact loads
- D. none of these Discuss
- 2. Induction hardening is basically a
Options- A. carburising process
- B. surface hardening process
- C. core-hardening process
- D. none of these Discuss
- 3. The carbon in the pig iron varies from
Options- A. 0.1 to 0.5%
- B. 0.5 to 1%
- C. 1 to 5%
- D. 5 to 10% Discuss
- 4. Pearlite consists of
Options- A. 13% carbon and 87% ferrite
- B. 13% cementite and 87% ferrite
- C. 13% ferrite and 87% cementite
- D. 6.67% carbon and 93.33% iron Discuss
- 5. The brown smoke during the operation of a bessemer Converter indicates that the
Options- A. air is burning out silicon and managanese
- B. silicon and manganese has burnt and carbon has started oxidising
- C. the converter must be titled to remove the contents of the converter
- D. the brown smoke does not occur during the operation of a bessemer converter Discuss
- 6. In induction hardening, the depth of hardening is controlled by controlling the voltage.
Options- A. Correct
- B. Incorrect Discuss
- 7. Bronze is an alloy of
Options- A. copper and zinc
- B. copper and tin
- C. copper, tin and zinc
- D. none of these Discuss
- 8. Blast furnace is used to produce
Options- A. pig iron
- B. cast iron
- C. wrought iron
- D. steel Discuss
- 9. The austenite is a solid solution of carbon or iron carbide in gamma-iron.
Options- A. Correct
- B. Incorrect Discuss
- 10. Cartidge brass can be
Options- A. cold rolled into sheets
- B. drawn into wires
- C. formed into tube
- D. any one of these Discuss
Engineering Materials problems
Search Results
Correct Answer: externally applied forces with breakdown or yielding
Correct Answer: surface hardening process
Correct Answer: 1 to 5%
Correct Answer: 13% cementite and 87% ferrite
Correct Answer: air is burning out silicon and managanese
Correct Answer: Correct
Correct Answer: copper and tin
Correct Answer: pig iron
Correct Answer: Correct
Correct Answer: any one of these
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.