Discussion
Home ‣ Mechanical Engineering ‣ Hydraulic Machines Comments
- Question
Braking jet in an impulse turbine is used
Options- A. to break the jet of water
- B. to bring the runner to rest in a short time
- C. to change the direction of runner
- D. none of these
- Correct Answer
- to bring the runner to rest in a short time
- 1. Which of the following statement is correct?
Options- A. In an impulse turbine, the water impinges on the buckets with pressure energy.
- B. In a reaction turbine, the water glides over the moving vanes with kinetic energy.
- C. In an impulse turbine, the pressure of the flowing water remains unchanged and is equal to atmospheric pressure.
- D. In a reaction turbine, the pressure of the flowing water increases after gliding over the vanes. Discuss
- 2. The gross or total head of the turbine is the __________ of the water levels at the head race and tail race.
Options- A. sum
- B. difference
- C. product Discuss
- 3. The overall efficiency for a Pelton wheel lies between
Options- A. 0.50 to 0.65
- B. 0.65 to 0.75
- C. 0.75 to 0.85
- D. 0.85 to 0.90 Discuss
- 4. In an axial flow reaction turbine, the water flows __________ to the axis of the wheel.
Options- A. parallel
- B. perpendicular Discuss
- 5. Which of the following hydraulic unit is used for transmitting increased or decreased torque to the driven shaft?
Options- A. Hydraulic ram
- B. Hydraulic intensifier
- C. Hydraulic torque converter
- D. Hydraulic accumulator Discuss
- 6. A hydraulic accumulator is a device used to store __________ energy which may be supplied to a machine later on.
Options- A. strain
- B. pressure
- C. kinetic Discuss
- 7. A reciprocating pump is also called a __________ displacement pump.
Options- A. positive
- B. negative Discuss
- 8. The unit speed of the turbine runner is
Options- A.
- B.
- C.
- D.
Discuss
- 9. If the ratio of all the corresponding linear dimensions are equal, then the model and the prototype are said to have
Options- A. geometric similarity
- B. kinematic similarity
- C. dynamic similarity
- D. none of these Discuss
- 10. Head developed by a centrifugal pump is
Options- A. proportional to diameter of impeller
- B. proportional to speed of impeller
- C. proportional to diameter and speed of impeller
- D. none of the above Discuss
Hydraulic Machines problems
Search Results
Correct Answer: In an impulse turbine, the pressure of the flowing water remains unchanged and is equal to atmospheric pressure.
Correct Answer: difference
Correct Answer: 0.85 to 0.90
Correct Answer: parallel
Correct Answer: Hydraulic torque converter
Correct Answer: pressure
Correct Answer: positive
Correct Answer:
Correct Answer: geometric similarity
Correct Answer: proportional to diameter and speed of impeller
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.