logo

CuriousTab

CuriousTab

Discussion


Home Mechanical Engineering Strength of Materials Comments

  • Question
  • When a body is subjected to a direct tensile stress (?x) in one plane accompanied by a simple shear stress (?xy ), the maximum normal stress is


  • Options
  • A. When a body is subjected to a direct tensile stress (?x) in one plane accompanied by a simple shear
  • B. When a body is subjected to a direct tensile stress (?x) in one plane accompanied by a simple shear
  • C. When a body is subjected to a direct tensile stress (?x) in one plane accompanied by a simple shear
  • D. When a body is subjected to a direct tensile stress (?x) in one plane accompanied by a simple shear

  • Correct Answer
  •  


  • Strength of Materials problems


    Search Results


    • 1. The strength of the shaft is judged by the torque transmitted by the shaft.

    • Options
    • A. Yes
    • B. No
    • Discuss
    • 2. A pressure vessel is said to be a thin shell when the ratio of wall thickness of the vessel to its diameter is __________ 1/10.

    • Options
    • A. equal to
    • B. less than
    • C. greater than
    • Discuss
    • 3. The rectangular beam 'A ' has length l, width b and depth d. Another beam 'B' has the same width and depth but length is double that of 'A'. The elastic strength of beam 'B' will be __________ as compared to beam A.

    • Options
    • A. same
    • B. one-halt
    • C. one-fourth
    • D. one-eighth
    • Discuss
    • 4. Which of the following is the correct torsion equation?

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 5. The hoop stress in a thin cylindrical shell is

    • Options
    • A. longitudinal stress
    • B. compressive stress
    • C. radial stress
    • D. circumferential tensile stress
    • Discuss
    • 6. According to Euler's column theory, the crippling load of a column is given by p = ?2 EI/Cl2 In this equation, the value of C for a column with both ends hinged, is

    • Options
    • A. 1/4
    • B. 1/2
    • C. 1
    • D. 2
    • Discuss
    • 7. A simply supported beam with a gradually varying load from zero at B and w per unit length at A is shown in the below figure. The shear force at B is equal to

    • Options
    • A. wl/6
    • B. wl/3
    • C. wl
    • D. 2 wl/3
    • Discuss
    • 8. The ratio of linear stress to the linear strain is called

    • Options
    • A. modulus of rigidity
    • B. modulus of elasticity
    • C. bulk modulus
    • D. Poisson's ratio
    • Discuss
    • 9. When a load on the free end of a cantilever beam is increased, failure will occur

    • Options
    • A. at the free end
    • B. at the fixed end
    • C. in the middle of the beam
    • D. at a distance 2l/3 from free end
    • Discuss
    • 10. The length of a conical bar is l, diameter of base is d and weight per unit volume is w. It is fixea at its upper end and hanging freely. The elongation of the bar under the action of its own weight will be

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment