logo

CuriousTab

CuriousTab

Discussion


Home Mechanical Engineering Strength of Materials Comments

  • Question
  • In a beam of uniform strength, the bending stress developed is constant and is equal to the allowable stress at every section of the beam.


  • Options
  • A. True
  • B. False

  • Correct Answer
  • True 


  • Strength of Materials problems


    Search Results


    • 1. A continuous beam is one which is

    • Options
    • A. fixed at both ends
    • B. fixed at one end and free at the other end
    • C. supported on more than two supports
    • D. extending beyond the supports
    • Discuss
    • 2. The bending moment of a cantilever beam of length l and carrying a uniformly distributed load of w per unit length is __________ at the fixed end.

    • Options
    • A. wl/4
    • B. wl/2
    • C. wl
    • D. wl2/2
    • Discuss
    • 3. Every direct stress is always accompanied by a strain in its own direction and an opposite kind of strain in every direction, at right angles to it. Such a strain is known as

    • Options
    • A. linear strain
    • B. lateral strain
    • C. volumetric strain
    • D. shear strain
    • Discuss
    • 4. The unit of Young's modulus is same as that of stress.

    • Options
    • A. True
    • B. False
    • Discuss
    • 5. The Young's modulus of a material is 125 GPa and Poissons ratio is 0.25. The modulus of rigidity of me material is

    • Options
    • A. 30 GPa
    • B. 50 GPa
    • C. 80 GPa
    • D. 100 GPa
    • Discuss
    • 6. The value of equivalent length is taken to be half of the actual length of a column with one end fixed and the other end free.

    • Options
    • A. Agree
    • B. Disagree
    • Discuss
    • 7. According to Euler's column theory, the crippling load for a column of length (l) with one end fixed and the other end hinged, is

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 8. In a stress-strain diagram for mild steel, as shown in the below figure, the point A represents

    • Options
    • A. elastic limit
    • B. upper yield-point
    • C. lower yield point
    • D. breaking point
    • Discuss
    • 9. The shear force diagram of a cantilever beam of length l and carrying a uniformly distributed load of w per unit length will be

    • Options
    • A. a right angled triangle
    • B. an issoscles triangle
    • C. an equilateral triangle
    • D. a rectangle
    • Discuss
    • 10. A load which acts at a point on a beam is not called uniformly distributed load.

    • Options
    • A. Agree
    • B. Disagree
    • Discuss


    Comments

    There are no comments.

Enter a new Comment