Discussion
Home ‣ Mechanical Engineering ‣ Strength of Materials Comments
- Question
The stiffness of a closely-coiled helical spring is __________ proportional to number of turns.
Options- A. directly
- B. inversely
- Correct Answer
- inversely
- 1. In the below figure, the plastic range occurs
Options- A. before point A
- B. beyond point A
- C. between points A and D
- D. between points D and E Discuss
- 2. The planes, which carry no shear stress, are known as principal planes.
Options- A. True
- B. False Discuss
- 3. Within elastic limit, shear stress is __________ shear strain.
Options- A. equal to
- B. less than
- C. directly proportional to
- D. inversely proportional to Discuss
- 4. The maximum bending moment of a simply supported beam of span l and carrying a point load W at the centre of beam, is
Options- A. Wl/4
- B. Wl/2
- C. Wl
- D. Wl2/4 Discuss
- 5. A pressure vessel is said to be a thick shell, when
Options- A. it is made of thick sheets
- B. the internal pressure is very high
- C. the ratio of wall thickness of the vessel to its diameter is less than 1/10.
- D. the ratio of wall thickness of the vessel to its diameter is greater than 1/10. Discuss
- 6. The ratio of maximum shear stress developed in a rectangular beam and a circular beam of the same cross-sectional area is
Options- A. 2/3
- B. 3/4
- C. 1
- D. 9/8 Discuss
- 7. A beam of triangular section is placed with its base horizontal. The maximum shear stress occurs at
Options- A. apex of the triangle
- B. mid of the height
- C. centre of gravity of the triangle
- D. base of the triangle Discuss
- 8. The shear stress at the centre of a circular shaft under torsion is
Options- A. zero
- B. minimum
- C. maximum
- D. infinity Discuss
- 9. At the neutral axis of a beam, the shear stress is
Options- A. zero
- B. minimum
- C. maximum
- D. infinity Discuss
- 10. The product of Young's modulus (E) and moment of inertia (I) is known as
Options- A. modulus of rigidity
- B. bulk modulus
- C. flexural rigidity
- D. torsional rigidity Discuss
Strength of Materials problems
Search Results
Correct Answer: beyond point A
Correct Answer: True
Correct Answer: directly proportional to
Correct Answer: Wl/4
Correct Answer: the ratio of wall thickness of the vessel to its diameter is greater than 1/10.
Correct Answer: 9/8
Correct Answer: mid of the height
Correct Answer: zero
Correct Answer: maximum
Correct Answer: flexural rigidity
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.