logo

CuriousTab

CuriousTab

Discussion


Home Mechanical Engineering Strength of Materials Comments

  • Question
  • A cantilever beam is one which is


  • Options
  • A. fixed at both ends
  • B. fixed at one end and free at the other end
  • C. supported at its ends
  • D. supported on more than two supports

  • Correct Answer
  • fixed at one end and free at the other end 


  • Strength of Materials problems


    Search Results


    • 1. A spring used to absorb shocks and vibrations is

    • Options
    • A. conical spring
    • B. torsion spring
    • C. leaf spring
    • D. disc spring
    • Discuss
    • 2. In a leaf spring, the deflection at the centre is

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 3. For the two shafts connected in parallel and subjected to twisting moment, the angle of twist of each shaft will be same.

    • Options
    • A. Yes
    • B. No
    • Discuss
    • 4. The bending moment at the free end of a cantilever beam is

    • Options
    • A. zero
    • B. minimum
    • C. maximum
    • Discuss
    • 5. The assumption, generally, made in the theory of simple bending is that

    • Options
    • A. the beam material is perfectly homogenous and isotropic
    • B. the beam material is stressed within its elastic limit
    • C. the plane sections before bending remain plane after bending
    • D. all of the above
    • Discuss
    • 6. The hoop stress in a thick cylindrical shell is maximum at the inner radius.

    • Options
    • A. True
    • B. False
    • Discuss
    • 7. For a shaft, the shear stress at a point is __________ the distance from the axis of the shaft.

    • Options
    • A. equal to
    • B. directly proportional to
    • C. inversely proportional to
    • Discuss
    • 8. In the below figure, stress is proportional to strain, for the portion

    • Options
    • A. from O to A
    • B. from A to C
    • C. from A to D
    • D. from D to E
    • Discuss
    • 9. Two closely-coiled helical springs 'A' and 'B' are equal in all respects but the number of turns of spring 'A' is double that of spring 'B'. The stiffness of spring 'A' will be __________ that of spring 'B'.

    • Options
    • A. one-sixteenth
    • B. one-eighth
    • C. one-fourth
    • D. one-half
    • Discuss
    • 10. When a body is subjected to two equal and opposite forces, acting tangentially across the resisting section, as a result of which the body tends to shear off across the section, the stress and strain induced is

    • Options
    • A. tensile stress, tensile strain
    • B. compressive stress, compressive strain
    • C. shear stress, tensile strain
    • D. shear stress, shear strain
    • Discuss


    Comments

    There are no comments.

Enter a new Comment