logo

CuriousTab

CuriousTab

Discussion


Home Mechanical Engineering Strength of Materials Comments

  • Question
  • In a leaf spring, the deflection at the centre is


  • Options
  • A. In a leaf spring, the deflection at the centre is
  • B. In a leaf spring, the deflection at the centre is
  • C. In a leaf spring, the deflection at the centre is
  • D. In a leaf spring, the deflection at the centre is

  • Correct Answer
  •  


  • Strength of Materials problems


    Search Results


    • 1. For the two shafts connected in parallel and subjected to twisting moment, the angle of twist of each shaft will be same.

    • Options
    • A. Yes
    • B. No
    • Discuss
    • 2. The bending moment at the free end of a cantilever beam is

    • Options
    • A. zero
    • B. minimum
    • C. maximum
    • Discuss
    • 3. The assumption, generally, made in the theory of simple bending is that

    • Options
    • A. the beam material is perfectly homogenous and isotropic
    • B. the beam material is stressed within its elastic limit
    • C. the plane sections before bending remain plane after bending
    • D. all of the above
    • Discuss
    • 4. When a body is subjected to direct tensile stresses (?x and ?y ) in two mutually perpendicular directions, accompanied by a simple shear stress ?xy , then in Mohr's circle method, the circle radius is taken as

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 5. The factor of safety is always more than unity.

    • Options
    • A. Correct
    • B. Incorrect
    • Discuss
    • 6. A spring used to absorb shocks and vibrations is

    • Options
    • A. conical spring
    • B. torsion spring
    • C. leaf spring
    • D. disc spring
    • Discuss
    • 7. A cantilever beam is one which is

    • Options
    • A. fixed at both ends
    • B. fixed at one end and free at the other end
    • C. supported at its ends
    • D. supported on more than two supports
    • Discuss
    • 8. The hoop stress in a thick cylindrical shell is maximum at the inner radius.

    • Options
    • A. True
    • B. False
    • Discuss
    • 9. For a shaft, the shear stress at a point is __________ the distance from the axis of the shaft.

    • Options
    • A. equal to
    • B. directly proportional to
    • C. inversely proportional to
    • Discuss
    • 10. In the below figure, stress is proportional to strain, for the portion

    • Options
    • A. from O to A
    • B. from A to C
    • C. from A to D
    • D. from D to E
    • Discuss


    Comments

    There are no comments.

Enter a new Comment