logo

CuriousTab

CuriousTab

Discussion

Home ‣ Mechanical Engineering ‣ Strength of Materials Comments
  • Question

  • The maximum shear stress of a beam of triangular section occurs above the neutral axis,


  • Options
  • A. Correct
  • B. Incorrect

  • Correct Answer
  • Correct 

    • Strength of Materials problems

    Search Results

    • 1. The rivets are made from ductile material.

    • Options
    • A. Yes
    • B. No
      • Discuss
    • 2. The Poisson's ratio for cast iron varies from

    • Options
    • A. 0.33 to 0.37
    • B. 0.21 to 0.26
    • C. 0.31 to 0.34
    • D. 0.32 to 0.42
      • Discuss
    • 3. The polar moment of inertia of a hollow shaft of outer diameter (D) and inner diameter (d) is

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss
    • 4. The polar modulus for a solid shaft of diameter (D) is

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss
    • 5. The maximum deflection of a cantilever beam of length l with a uniformly distributed load of w per unit length is (where W = wl)

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss
    • 6. For a beam, as shown in the below figure, the maximum deflection lies at

    • Options
    • A. from B
    • B. from A
    • C. from B
    • D. from A
      • Discuss
    • 7. The resultant stress on an inclined plane which is inclined at an angle ? to the normal cross-section of a body which is subjected to a direct tensile stress (?) in one plane, is

    • Options
    • A. ? sin ?
    • B. ? cos ?
    • C. ? sin 2?
    • D. ? cos 2?
      • Discuss
    • 8. When a rectangular beam is loaded transversely, the zero stress is developed on the neutral axis.

    • Options
    • A. True
    • B. False
      • Discuss
    • 9. Compression members always tend to buckle in the direction of the

    • Options
    • A. axis of load
    • B. perpendicular to the axis of load
    • C. minimum cross section
    • D. least radius of gyration
      • Discuss
    • 10. According to Euler's column theory, the crippling load for a column of length (l) fixed at both ends is __________ the crippling load for a similar column hinged at both ends.

    • Options
    • A. equal to
    • B. two times
    • C. four times
    • D. eight times
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.