Discussion
Home ‣ Mechanical Engineering ‣ Production Engineering Comments
- Question
In a planer
Options- A. tool is stationary and work reciprocates
- B. work is stationary and tool reciprocates
- C. tool moves over stationary work
- D. tool moves over reciprocating work
- Correct Answer
- tool is stationary and work reciprocates
- 1. The floating position of the holding fixture in a rotary transfer device is used to
Options- A. improve the accuracy of location
- B. reduce the tendency to over-index
- C. improve upon the acceleration and deceleration characteristics
- D. reduce the cycle time Discuss
- 2. A round nose tool has no back rake and side rake.
Options- A. Correct
- B. Incorrect Discuss
- 3. In a plain milling cutter, the portion of the gash adjacent to the cutting edge on which the chip impinges is called
Options- A. face
- B. fillet
- C. land
- D. lead Discuss
- 4. The process of changing the shape of grinding wheel as it becomes worn due to breaking away of the abrasive and bond, is called
Options- A. truing
- B. dressing
- C. facing
- D. clearing Discuss
- 5. In which of the following machine, the work rotates and the tool is stationary?
Options- A. Vertical boring machine
- B. Horizontal boring machine
- C. Precision boring machine
- D. Jig boring machine Discuss
- 6. Discontinuous chips are formed during machining of
Options- A. brittle metals
- B. ductile metals
- C. hard metals
- D. soft metals Discuss
- 7. The lathe centres are provided with standard taper known as
Options- A. Morse taper
- B. Seller's taper
- C. Chapman taper
- D. Brown and Sharpe taper Discuss
- 8. The operation of smoothing and squaring the surface around a hole is known as
Options- A. counter-sinking
- B. counter-boring
- C. trepanning
- D. spot facing Discuss
- 9. In metal cutting operations, the shear angle is the angle made by the shear plane with the
Options- A. direction of the tool axis
- B. direction of tool travel
- C. perpendicular to the direction of the tool axis
- D. central plane of the workpiece Discuss
- 10. An operation of enlarging the end of a hole cylindrically is known as grooving.
Options- A. Correct
- B. Incorrect Discuss
Production Engineering problems
Search Results
Correct Answer: reduce the cycle time
Correct Answer: Correct
Correct Answer: face
Correct Answer: truing
Correct Answer: Vertical boring machine
Correct Answer: brittle metals
Correct Answer: Morse taper
Correct Answer: spot facing
Correct Answer: direction of tool travel
Correct Answer: Incorrect
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.