logo

CuriousTab

CuriousTab

Discussion


Home Mechanical Engineering Heat Transfer, Refrigeration and Air Conditioning Comments

  • Question
  • For unsaturated air, the dew point temperature is __________ wet bulb temperature.


  • Options
  • A. equal to
  • B. less than
  • C. more than

  • Correct Answer
  • less than 


  • Heat Transfer, Refrigeration and Air Conditioning problems


    Search Results


    • 1. The pressure at the outlet of a refrigerant compressor is called

    • Options
    • A. suction pressure
    • B. discharge pressure
    • C. critical pressure
    • D. back pressure
    • Discuss
    • 2. A mixture of dry air and water vapour, when the air has diffused the maximum amount of water vapour into it, is called

    • Options
    • A. dry air
    • B. moist air
    • C. saturated air
    • D. specific humidity
    • Discuss
    • 3. The by-pass factor, in case of sensible cooling of air, is given by (where td1 = Dry bulb temperature of air entering the cooling coil, td2 = Dry bulb temperature of air leaving the cooling coil, and td3 = Dry bulb temperature of the cooling coil)

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 4. Emissivity of a body will be equal to its absorptivity at all temperatures.

    • Options
    • A. Yes
    • B. No
    • Discuss
    • 5. The expansion valve in a refrigerator controls the flow of refrigerant.

    • Options
    • A. Correct
    • B. Incorrect
    • Discuss
    • 6. A thermostatic expansion valve in a refrigeration system

    • Options
    • A. ensures the evaporator completely filled with refrigerant of the load
    • B. is suitable only for constant load systems
    • C. maintains different temperatures in evaporator in proportion to load
    • D. none of the above
    • Discuss
    • 7. The inclined and non-uniformly spaced straight lines on a psychrometric chart indicates wet bulb temperature.

    • Options
    • A. Agree
    • B. Disagree
    • Discuss
    • 8. The C.O.P. of a heat pump working on a reversed Carnot cycle is

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 9. The operating temperature of a cold storage is - 2° C. The heat leakage from the surrounding is 30 kW for the ambient temperature of 40° C. The actual C.O.P. of refrigeration plant used is one fourth that of ideal plant working between the same temperatures. The power required to drive the plant is

    • Options
    • A. 1.86 kW
    • B. 3.72 kW
    • C. 7.44 kW
    • D. 18.6 kW
    • Discuss
    • 10. The dry bulb temperature lines, on the psychrometric chart are

    • Options
    • A. vertical and uniformly spaced
    • B. horizontal and uniformly spaced
    • C. horizontal and non-uniformly spaced
    • D. curved lines
    • Discuss


    Comments

    There are no comments.

Enter a new Comment