Discussion
Home ‣ Mechanical Engineering ‣ Heat Transfer, Refrigeration and Air Conditioning Comments
- Question
The alignment circle is marked on the psychrometric chart at
Options- A. 20°C DBT and 50% RH
- B. 26°C DBT and 50% RH
- C. 20°C DBT and 60% RH
- D. 26°C DBT and 60% RH
- Correct Answer
- 26°C DBT and 50% RH
- 1. The thermal diffusivity for gases is generally __________ those for liquids.
Options- A. equal to
- B. less than
- C. greater than Discuss
- 2. The capillary tube is not used in large capacity refrigeration systems because
Options- A. cost is too high
- B. capacity control is not possible
- C. it is made of copper
- D. required pressure drop can not be achieved Discuss
- 3. The freezing point of R-12 is
Options- A. -86.6°C
- B. -95.2°C
- C. -107.7°C
- D. -135.8°C Discuss
- 4. In a saturated air-water vapour mixture, the
Options- A. dry bulb temperature is higher than wet bulb temperature
- B. dew point temperature is lower than wet bulb temperature
- C. dry bulb, wet bulb and dew point temperature are same
- D. dry bulb temperature is higher than dew point temperature Discuss
- 5. The superheated vapour region, in a pressure enthalpy chart, is represented by the space
Options- A. to the left of saturated liquid line
- B. to the right of saturated liquid line
- C. between the saturated liquid line and saturated vapour line
- D. none of the above Discuss
- 6. One tonne of refrigeration (1TR) means that the heat removing capacity is
Options- A. 21 kJ/min
- B. 210 kJ/min
- C. 420 kJ/min
- D. 620 kJ/min Discuss
- 7. The freezing point of carbon dioxide is equal to boiling point of R-12.
Options- A. Correct
- B. Incorrect Discuss
- 8. According to Stefan-Boltzmann law, the total radiation from a black body per second per unit area is directly proportional to the
Options- A. absolute temperature
- B. square of the absolute temperature
- C. cube of the absolute temperature
- D. fourth power of the absolute temperature Discuss
- 9. A boot-strap air cooling system has
Options- A. one heat exchanger
- B. two heat exchangers
- C. three heat exchangers
- D. four heat exchangers Discuss
- 10. The logarithmic mean temperature difference (tm) is given by (where ?t1 and ?t2 are temperature differences between the hot and cold fluids at entrance and exit)
Options- A.
- B.
- C. tm = (?t1 - ?t1) loge(?t1/?t1)
- D.
Discuss
Heat Transfer, Refrigeration and Air Conditioning problems
Search Results
Correct Answer: greater than
Correct Answer: capacity control is not possible
Correct Answer: -135.8°C
Correct Answer: dry bulb, wet bulb and dew point temperature are same
Correct Answer: between the saturated liquid line and saturated vapour line
Correct Answer: 210 kJ/min
Correct Answer: Incorrect
Correct Answer: fourth power of the absolute temperature
Correct Answer: two heat exchangers
Correct Answer:
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.