logo

CuriousTab

CuriousTab

Discussion


Home Mechanical Engineering Heat Transfer, Refrigeration and Air Conditioning Comments

  • Question
  • In a saturated air-water vapour mixture, the


  • Options
  • A. dry bulb temperature is higher than wet bulb temperature
  • B. dew point temperature is lower than wet bulb temperature
  • C. dry bulb, wet bulb and dew point temperature are same
  • D. dry bulb temperature is higher than dew point temperature

  • Correct Answer
  • dry bulb, wet bulb and dew point temperature are same 


  • Heat Transfer, Refrigeration and Air Conditioning problems


    Search Results


    • 1. The superheated vapour region, in a pressure enthalpy chart, is represented by the space

    • Options
    • A. to the left of saturated liquid line
    • B. to the right of saturated liquid line
    • C. between the saturated liquid line and saturated vapour line
    • D. none of the above
    • Discuss
    • 2. According to Prevost's theory of exchanges, every body irrespective of its temperature continuously emit heat radiations to the surrounding bodies and at the same time receives heat radiations from the surrounding bodies.

    • Options
    • A. True
    • B. False
    • Discuss
    • 3. The thermostatic expansion valve operates on the changes in the

    • Options
    • A. degree of superheat at exit from the evaporator
    • B. temperature of the evaporator
    • C. pressure in the evaporator
    • D. none of the above
    • Discuss
    • 4. The C.O.P. of a Carnot refrigerator in winter will be __________ as compared to C.O.P. in summer.

    • Options
    • A. same
    • B. lower
    • C. higher
    • Discuss
    • 5. The super-heating in a refrigeration cycle

    • Options
    • A. does not alter C.O.P.
    • B. increases C.O.P.
    • C. decreases C.O.P.
    • D. none of these
    • Discuss
    • 6. The freezing point of R-12 is

    • Options
    • A. -86.6°C
    • B. -95.2°C
    • C. -107.7°C
    • D. -135.8°C
    • Discuss
    • 7. The capillary tube is not used in large capacity refrigeration systems because

    • Options
    • A. cost is too high
    • B. capacity control is not possible
    • C. it is made of copper
    • D. required pressure drop can not be achieved
    • Discuss
    • 8. The thermal diffusivity for gases is generally __________ those for liquids.

    • Options
    • A. equal to
    • B. less than
    • C. greater than
    • Discuss
    • 9. The alignment circle is marked on the psychrometric chart at

    • Options
    • A. 20°C DBT and 50% RH
    • B. 26°C DBT and 50% RH
    • C. 20°C DBT and 60% RH
    • D. 26°C DBT and 60% RH
    • Discuss
    • 10. One tonne of refrigeration (1TR) means that the heat removing capacity is

    • Options
    • A. 21 kJ/min
    • B. 210 kJ/min
    • C. 420 kJ/min
    • D. 620 kJ/min
    • Discuss


    Comments

    There are no comments.

Enter a new Comment