logo

CuriousTab

CuriousTab

Discussion


Home Mechanical Engineering IC Engines and Nuclear Power Plants Comments

  • Question
  • A power plant giving least running cost of production of electrical power is


  • Options
  • A. steam power plant
  • B. gas turbine power plant
  • C. hydro electric power plant
  • D. nuclear power plant

  • Correct Answer
  • nuclear power plant 


  • IC Engines and Nuclear Power Plants problems


    Search Results


    • 1. In diesel engines, the ignition takes place due to the heat produced in the engine cylinder at the end of compression.

    • Options
    • A. Correct
    • B. Incorrect
    • Discuss
    • 2. A nuclear reactor is said to be critical when the neutron population in the reactor core is

    • Options
    • A. rapidly increasing leading to the point of explosion
    • B. decreasing from the specified value
    • C. reduced to zero
    • D. constant
    • Discuss
    • 3. The ignition of the charge by some hot surface within the engine before the passage of spark is called

    • Options
    • A. pre-ignition
    • B. detonation
    • C. ignition delay
    • D. auto-ignition
    • Discuss
    • 4. If the compression ratio in I.C. engine increases, then its thermal efficiency will

    • Options
    • A. decrease
    • B. increase
    • C. remain same
    • Discuss
    • 5. Which of the following statement is correct regarding the features of a Breeder reactor?

    • Options
    • A. It produces more fuel than it consumes.
    • B. It requires highly enriched fuel.
    • C. It requires liquid sodium metal as moderator.
    • D. all of the above
    • Discuss
    • 6. The loud pulsating noise heard within the cylinder of an internal combustion engine is known as

    • Options
    • A. detonation
    • B. turbulence
    • C. pre-ignition
    • D. supercharging
    • Discuss
    • 7. The slowing down of fast neutrons is desirable because slow moving neutrons are more effective than fast neutrons in triggering fission.

    • Options
    • A. Agree
    • B. Disagree
    • Discuss
    • 8. The brake power (B.P.) of the engine is given by (where W = Brake load or dead load in newtons, l = Length of arm in metres, N = Speed of engine in r.p.m., S - Spring balance reading in newtons, D = Dia. of brake drum in metres, and d = Dia. of rope in metres)

    • Options
    • A.
    • B.
    • C.
    • D. all of these
    • Discuss
    • 9. A supercharged engine as compared to an ordinary engine

    • Options
    • A. is lighter
    • B. requires smaller foundations
    • C. consumes less lubricating oil
    • D. all of these
    • Discuss
    • 10. The fuels in order of decreasing knock tendency for spark ignition engines are

    • Options
    • A. paraffins, aromatics, napthenes
    • B. paraffins, napthenes, aromatics
    • C. napthenes, aromatics, paraffins
    • D. napthenes, paraffins, aromatics
    • Discuss


    Comments

    There are no comments.

Enter a new Comment