Discussion
Home ‣ Mechanical Engineering ‣ IC Engines and Nuclear Power Plants Comments
- Question
The thermal efficiency of a petrol engine is __________ as compared to diesel engine.
Options- A. same
- B. less
- C. more
- Correct Answer
- less
- 1. The compression ignition engines are governed by
Options- A. hit and miss governing
- B. qualitative governing
- C. quantitative governing
- D. combination of (b) and (c) Discuss
- 2. A diesel engine, during suction stroke, draws
Options- A. air only
- B. diesel only
- C. a mixture of diesel and air Discuss
- 3. Stoichiometric ratio is
Options- A. chemically correct air-fuel ratio by weight
- B. chemically correct air-fuel ratio by volume
- C. actual air-fuel ratio for maximum efficiency
- D. none of the above Discuss
- 4. If the fuel is rich in fissionable material, the reactor can be made more compact than if the percentage of fissionable atoms is small.
Options- A. Agree
- B. Disagree Discuss
- 5. Iso-octane (C8H18) has octane number of
Options- A. 0
- B. 50
- C. 100
- D. 120 Discuss
- 6. The spark ignition engines are governed by
Options- A. hit and miss governing
- B. qualitative governing
- C. quantitative governing
- D. combination of (b) and (c) Discuss
- 7. In petrol engines, advancing of the spark timing will __________ the knocking tendency.
Options- A. not effect
- B. decrease
- C. increase Discuss
- 8. The delay period in oil engines increases with increase in the speed of engine.
Options- A. Agree
- B. Disagree Discuss
- 9. If the temperature of intake air in internal combustion engine increases, then its efficiency will
Options- A. remain same
- B. decrease
- C. increase Discuss
- 10. In a four stroke cycle petrol engine, , the compression
Options- A. starts at 40° after bottom dead centre and ends at 30° before top dead centre
- B. starts at 40° before bottom dead centre and ends at 30° after bottom dead centre
- C. starts at bottom dead centre and ends at top dead centre
- D. may start and end anywhere Discuss
IC Engines and Nuclear Power Plants problems
Search Results
Correct Answer: qualitative governing
Correct Answer: air only
Correct Answer: chemically correct air-fuel ratio by volume
Correct Answer: Agree
Correct Answer: 100
Correct Answer: quantitative governing
Correct Answer: increase
Correct Answer: Disagree
Correct Answer: decrease
Correct Answer: starts at 40° after bottom dead centre and ends at 30° before top dead centre
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.