Discussion
Home ‣ Mechanical Engineering ‣ IC Engines and Nuclear Power Plants Comments
- Question
The size of a reactor at which the chain reaction can be initiated (i.e. when system becomes critical) with just enough fissionable material (called critical mass of fuel) is known as critical size of reactor.
Options- A. Correct
- B. Incorrect
- Correct Answer
- Correct
- 1. In order to eliminate knocking in compression ignition engines, there should be
Options- A. short delay period
- B. late auto-ignition
- C. low compression ratio
- D. high self ignition temperature of fuel Discuss
- 2. A fuel will detonate less if it has higher self ignition temperature.
Options- A. True
- B. False Discuss
- 3. The correct sequence of the decreasing order of brake thermal efficiency of the three given basic types of engines is
Options- A. four stroke C.I. engine, four stroke S.I. engine, two stroke S.I. engine
- B. four stroke S.I. engine, four stroke C.I. engine, two stroke S.I. engine
- C. four stroke C.I. engine, two stroke S.I. engine, four stroke S.I. engine
- D. two stroke S.I. engine, four stroke S.I. engine, four stroke C.I. engine Discuss
- 4. The indicated mean effective pressure of an engine is obtained from the indicator diagram drawn with the help of an engine indicator.
Options- A. True
- B. False Discuss
- 5. Which one of the following event would reduce volumetric efficiency of a vertical compression ignition engine?
Options- A. inlet valve closing after bottom dead centre
- B. inlet valve closing before bottom dead centre
- C. inlet valve opening before top dead centre
- D. exhaust valve closing after top dead centre Discuss
- 6. Which of the following statement is correct?
Options- A. Compression ratio for petrol engines varies from 6 to 10.
- B. Higher compression ratio in diesel engines results in higher pressures.
- C. Petrol engines work on Otto cycle.
- D. all of the above Discuss
- 7. The two reference fuels used for cetane rating are
Options- A. cetane and iso-octane
- B. cetane and alpha-methyl naphthalene
- C. cetane and normal heptane
- D. cetane and tetra ethyl lead Discuss
- 8. Number of working strokes per min. for a four stroke cycle engine are __________ the speed of the engine in r.p.m.
Options- A. equal to
- B. one-half
- C. twice
- D. four-times Discuss
- 9. The indicated power for multi-cylinder engine will be same as that of a single cylinder engine.
Options- A. True
- B. False Discuss
- 10. If the speed of the engine is increased, the indicated power will
Options- A. increase
- B. decrease
- C. remain same Discuss
IC Engines and Nuclear Power Plants problems
Search Results
Correct Answer: short delay period
Correct Answer: True
Correct Answer: four stroke C.I. engine, four stroke S.I. engine, two stroke S.I. engine
Correct Answer: True
Correct Answer: inlet valve closing before bottom dead centre
Correct Answer: all of the above
Correct Answer: cetane and alpha-methyl naphthalene
Correct Answer: one-half
Correct Answer: False
Correct Answer: increase
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.