Discussion
Home ‣ Mechanical Engineering ‣ IC Engines and Nuclear Power Plants Comments
- Question
The delay period in compression ignition engines depends upon
Options- A. temperature and pressure in the cylinder at the time of injection
- B. nature of the fuel mixture strength
- C. relative velocity between the fuel injection and air turbulence pressure of residual gases
- D. all of the above
- Correct Answer
- all of the above
- 1. If V1 is the jet velocity and V0 is the vehicle velocity, then propulsive efficiency of a turbo-jet engine is
Options- A.
- B.
- C.
- D.
Discuss
- 2. Lubrication in I.C. engines dissipates the heat generated from the moving parts due to friction.
Options- A. True
- B. False Discuss
- 3. The working pressure and temperature inside the cylinder of an internal combustion engine is __________ as compared to a steam engine.
Options- A. low
- B. very low
- C. high
- D. very high Discuss
- 4. The thermodynamic cycle on which the petrol engine works, is
Options- A. Otto cycle
- B. Joule cycle
- C. Rankine cycle
- D. Stirling cycle Discuss
- 5. The inlet valve of a four stroke cycle internal combustion engine remains open for
Options- A. 130°
- B. 180°
- C. 230°
- D. 270° Discuss
- 6. A mixture containing 65% of iso-octane and 35% of normal heptane will have
Options- A. cetane number 65
- B. octane number 65
- C. qetane number 35
- D. octane number 35 Discuss
- 7. The increase of efficiency of a compression ignition engine, as the load decreases, is due to
Options- A. higher maximum temperature
- B. qualitative governing
- C. quantitative governing
- D. hit and miss governing Discuss
- 8. The knocking tendency in spark ignition engines can be decreased by adding dopes like tetra ethyle lead and ethylene dibromide.
Options- A. Agree
- B. Disagree Discuss
- 9. The function of a distributor in a coil ignition system of I.C. engines is
Options- A. to distribute spark
- B. to distribute power
- C. to distribute current
- D. to time the spark Discuss
- 10. Which of the following statement is correct regarding petrol engines?
Options- A. A fine fuel spray mixed with air is ignited by the heat of compression which is at a high pressure.
- B. The fuel supplied to the engine cylinder is mixed with necessary amount of air and the mixture in ignited with the help of a spark plug.
- C. The fuel is first evaporated after passing through a carburettor and is mixed with air before ignition.
- D. all of the above Discuss
IC Engines and Nuclear Power Plants problems
Search Results
Correct Answer:
Correct Answer: True
Correct Answer: very high
Correct Answer: Otto cycle
Correct Answer: 230°
Correct Answer: octane number 65
Correct Answer: qualitative governing
Correct Answer: Agree
Correct Answer: to time the spark
Correct Answer: The fuel supplied to the engine cylinder is mixed with necessary amount of air and the mixture in ignited with the help of a spark plug.
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.