Discussion
Home ‣ Mechanical Engineering ‣ Hydraulics and Fluid Mechanics Comments
- Question
The length of a liquid stream while flowing over a weir __________ at the ends of the sill.
Options- A. expands
- B. does not change
- C. contracts
- Correct Answer
- contracts
- 1. The depth of centre of pressure lor an immersed surface inclined at an angle ? with the liquid surface lies at a distance equal to __________ the centre of gravity.
Options- A.
below - B. above
- C.
below - D. above
Discuss
- 2. The flow in a pipe or channel is said to be uniform when
Options- A. the liquid particles at all sectons have the same velocities
- B. the liquid particles at different sections have different velocities
- C. the quantity of liquid flowing per second is constant
- D. each liquid particle has a definite path Discuss
- 3. Coefficient of discharge Cd is equal to (where Cc = Coefficient of contraction, Cv = Coefficient of velocity, and Cr = Coefficient of resistance)
Options- A. Cc x Cv
- B. Cc x Cr
- C. Cv x Cr
- D. Cc/Cr Discuss
- 4. The pressure of fluid due to hammer blow is
Options- A. directly proportional to density of fluid
- B. inversely proportional to density of fluid
- C. directly proportional to (density)1/2 of fluid
- D. inversely proportional to (density)1/2 of fluid Discuss
- 5. When a liquid is flowing through a pipe, the velocity of the liquid is
Options- A. maximum at the centre and minimum near the walls
- B. minimum at the centre and maximum near the walls
- C. zero at the centre and maximum near the walls
- D. maximum at the centre and zero near the walls Discuss
- 6. The value of coefficient of velocity for a sharp edged orifice __________ with the head of water.
Options- A. decreases
- B. increases Discuss
- 7. A flow through an expanding tube at constant rate is called
Options- A. steady uniform flow
- B. steady non-uniform flow
- C. unsteady uniform flow
- D. unsteady non-uniform flow Discuss
- 8. When a body is placed over a liquid, it is subjected to gravitational force and upthrust of the liquid.
Options- A. True
- B. False Discuss
- 9. The critical depth meter is used to measure
Options- A. velocity of flow in an open channel
- B. depth of flow in an open channel
- C. hydraulic jump
- D. depth of channel Discuss
- 10. One cubic metre of water weighs
Options- A. 100 litres
- B. 250 litres
- C. 500 litres
- D. 1000 litres Discuss
Hydraulics and Fluid Mechanics problems
Search Results
Correct Answer:
below Correct Answer: the liquid particles at all sectons have the same velocities
Correct Answer: Cc x Cv
Correct Answer: directly proportional to (density)1/2 of fluid
Correct Answer: maximum at the centre and minimum near the walls
Correct Answer: increases
Correct Answer: steady non-uniform flow
Correct Answer: True
Correct Answer: hydraulic jump
Correct Answer: 1000 litres
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.