Discussion
Home ‣ Mechanical Engineering ‣ Hydraulics and Fluid Mechanics Comments
- Question
The pressure of fluid due to hammer blow is
Options- A. directly proportional to density of fluid
- B. inversely proportional to density of fluid
- C. directly proportional to (density)1/2 of fluid
- D. inversely proportional to (density)1/2 of fluid
- Correct Answer
- directly proportional to (density)1/2 of fluid
- 1. When a liquid is flowing through a pipe, the velocity of the liquid is
Options- A. maximum at the centre and minimum near the walls
- B. minimum at the centre and maximum near the walls
- C. zero at the centre and maximum near the walls
- D. maximum at the centre and zero near the walls Discuss
- 2. Select the wrong statement
Options- A. An equivalent pipe is treated as an ordinary pipe for all calculations
- B. The length of an equivalent pipe is equal to that of a compound pipe
- C. The discharge through an equivalent pipe is equal to that of a compound pipe
- D. The diameter of an equivalent pipe is equal to that of a compound pipe Discuss
- 3. A structure used to dam up a stream or river over which the water flows is called
Options- A. orifice
- B. notch
- C. weir
- D. dam Discuss
- 4. An orifice is said to be large, if
Options- A. the size of orifice is large
- B. the velocity of flow is large
- C. the available head of liquid is more than 5 times the height of orifice
- D. the available head of liquid is less than 5 times the height of orifice Discuss
- 5. Froude's number is the ratio of inertia force to
Options- A. pressure force
- B. elastic force
- C. gravity force
- D. surface tension force Discuss
- 6. Coefficient of discharge Cd is equal to (where Cc = Coefficient of contraction, Cv = Coefficient of velocity, and Cr = Coefficient of resistance)
Options- A. Cc x Cv
- B. Cc x Cr
- C. Cv x Cr
- D. Cc/Cr Discuss
- 7. The flow in a pipe or channel is said to be uniform when
Options- A. the liquid particles at all sectons have the same velocities
- B. the liquid particles at different sections have different velocities
- C. the quantity of liquid flowing per second is constant
- D. each liquid particle has a definite path Discuss
- 8. The depth of centre of pressure lor an immersed surface inclined at an angle ? with the liquid surface lies at a distance equal to __________ the centre of gravity.
Options- A.
below - B. above
- C.
below - D. above
Discuss
- 9. The length of a liquid stream while flowing over a weir __________ at the ends of the sill.
Options- A. expands
- B. does not change
- C. contracts Discuss
- 10. The value of coefficient of velocity for a sharp edged orifice __________ with the head of water.
Options- A. decreases
- B. increases Discuss
Hydraulics and Fluid Mechanics problems
Search Results
Correct Answer: maximum at the centre and minimum near the walls
Correct Answer: The diameter of an equivalent pipe is equal to that of a compound pipe
Correct Answer: weir
Correct Answer: the available head of liquid is less than 5 times the height of orifice
Correct Answer: gravity force
Correct Answer: Cc x Cv
Correct Answer: the liquid particles at all sectons have the same velocities
Correct Answer:
below Correct Answer: contracts
Correct Answer: increases
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.