Discussion
Home ‣ Mechanical Engineering ‣ Hydraulics and Fluid Mechanics Comments
- Question
The velocity through a channel of circular section will be maximum when the depth of water is __________ the diameter of the circular channel.
Options- A. 0.34 times
- B. 0.67 times
- C. 0.81 times
- D. 0.95 times
- Correct Answer
- 0.81 times
- 1. In a footstep bearing, if the radius of the shaft is doubled, then the torque required to overcome the viscous resistance will be
Options- A. double
- B. four times
- C. eight times
- D. sixteen times Discuss
- 2. A flow in which each liquid particle has a definite path, and the paths of individual particles do not cross each other, is called
Options- A. steady flow
- B. uniform flow
- C. streamline flow
- D. turbulent flow Discuss
- 3. A vessel of 4 m3 contains an oil which weighs 30 kN. The specific weight of the oil is
Options- A. 4.5 kN/m3
- B. 6 kN/m3
- C. 7.5 kN/m3
- D. 10 kN/m3 Discuss
- 4. The coefficient of discharge for an external mouthpiece depends upon
Options- A. velocity of liquid
- B. pressure of liquid
- C. area of mouthpiece
- D. length of mouthpiece Discuss
- 5. Surface tension force is the product of surface tension per unit length and cross-sectional area of flow.
Options- A. Correct
- B. Incorrect Discuss
- 6. When a tube of smaller diameter is dipped in water, the water rises in the tube with an upward __________ surface.
Options- A. concave
- B. convex Discuss
- 7. The density of a liquid in kg/m3 is numerically equal to its specific gravity.
Options- A. True
- B. False Discuss
- 8. Bulk modulus of a fluid is the ratio of
Options- A. shear stress to shear strain
- B. increase in volume to the viscosity of fluid
- C. increase in pressure to the volumetric strain
- D. critical velocity to the viscosity of fluid Discuss
- 9. Froude's number is the ratio of inertia force to
Options- A. pressure force
- B. elastic force
- C. gravity force
- D. surface tension force Discuss
- 10. An orifice is said to be large, if
Options- A. the size of orifice is large
- B. the velocity of flow is large
- C. the available head of liquid is more than 5 times the height of orifice
- D. the available head of liquid is less than 5 times the height of orifice Discuss
Hydraulics and Fluid Mechanics problems
Search Results
Correct Answer: sixteen times
Correct Answer: streamline flow
Correct Answer: 7.5 kN/m3
Correct Answer: length of mouthpiece
Correct Answer: Incorrect
Correct Answer: concave
Correct Answer: True
Correct Answer: increase in pressure to the volumetric strain
Correct Answer: gravity force
Correct Answer: the available head of liquid is less than 5 times the height of orifice
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.