logo

CuriousTab

CuriousTab

Discussion

Home ‣ Mechanical Engineering ‣ Hydraulics and Fluid Mechanics Comments
  • Question

  • The kinematic viscosity of an oil (in stokes) whose specific gravity is 0.95 and viscosity 0.011 poise, is


  • Options
  • A. 0.0116 stoke
  • B. 0.116 stoke
  • C. 0.0611 stoke
  • D. 0.611 stoke

  • Correct Answer
  • 0.0116 stoke 

    • Hydraulics and Fluid Mechanics problems

    Search Results

    • 1. According to Bazin, the coefficient of discharge varies with the height of water over the sill of a weir.

    • Options
    • A. Correct
    • B. Incorrect
      • Discuss
    • 2. The vacuum pressure can be measured with the help of a piezometer tube.

    • Options
    • A. True
    • B. False
      • Discuss
    • 3. A glass tube of small diameter (d) is dipped in fluid. The height of rise or fall in the tube given by (where w = Specific weight of liquid, ? = Angle of contact of the liquid surface, and ? = Surface tension)

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss
    • 4. The discharge over a rectangular notch is

    • Options
    • A. inversely proportional to H3/2
    • B. directly proportional to H3/2
    • C. inversely proportional to H5/2
    • D. directly proportional to H5/2
      • Discuss
    • 5. The pressure intensity in kN/m2 (or kPa) at any point in a liquid is (where w = Specific weight of liquid, and h = Depth of liquid from the surface)

    • Options
    • A. w
    • B. wh
    • C. w/h
    • D. h/w
      • Discuss
    • 6. Water is a __________ fluid.

    • Options
    • A. real
    • B. ideal
    • C. newtonian
    • D. non-newtonian
      • Discuss
    • 7. Falling drops of water become spheres due to the property of

    • Options
    • A. surface tension of water
    • B. compressibility of water
    • C. capillarity of water
    • D. viscosity of water
      • Discuss
    • 8. If the value of coefficient of discharge increases, the discharge through the orifice decreases.

    • Options
    • A. True
    • B. False
      • Discuss
    • 9. The torque required to overcome viscous resistance of a footstep bearing is (where ? = Viscosity of the oil, N = Speed of the shaft, R = Radius of the shaft, and t = Thickness of the oil film)

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss
    • 10. A closed tank is completely filled with an oil. If it is made to move with a horizontal acceleration, then the pressure at the back end will be more than that at the front end.

    • Options
    • A. Correct
    • B. Incorrect
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.