Discussion
Home ‣ Mechanical Engineering ‣ Hydraulics and Fluid Mechanics Comments
- Question
The power absorbed (in watts) in overcoming the viscous resistance of a footstep bearing is
Options- A.
- B.
- C.
- D.
- Correct Answer
-
- 1. A fluid whose viscosity does not change with the rate of deformation or shear strain is known as
Options- A. real fluid
- B. ideal fluid
- C. newtonian fluid
- D. non-newtonian fluid Discuss
- 2. A submerged body is said to be in a stable equilibrium, if its centre of gravity __________ the centre of buoyancy.
Options- A. coincides with
- B. lies below
- C. lies above Discuss
- 3. If the depth of water in an open channel is greater than the critical depth, the flow is called
Options- A. critical flow
- B. turbulent flow
- C. tranquil flow
- D. torrential flow Discuss
- 4. The pressure of a liquid measured with the help of a piezometer tube is
Options- A. vacuum pressure
- B. gauge pressure
- C. absolute pressure
- D. atmospheric pressure Discuss
- 5. The ratio of the inertia force to the viscous force is called
Options- A. Reynold's number
- B. Froude's number
- C. Weber's number
- D. Euler's number Discuss
- 6. The total pressure on an immersed surface inclined at an angle ? with the liquid surface is
Options- A. wA
- B. wx
- C. wAx
- D. wAx/sin ? Discuss
- 7. The flow in a pipe or channel is said to be non-uniform when
Options- A. the liquid particles at all sections have the same velocities
- B. the liquid particles at different sections have different velocities
- C. the quantity of liquid flowing per second is constant
- D. each liquid particle has a definite path Discuss
- 8. A venturiflume is used to measure
Options- A. pressure of liquid
- B. discharge of liquid
- C. pressure difference between two points in a channel
- D. pressure difference between two points in a pipe Discuss
- 9. The pressure measured with the help of a pressure gauge is called
Options- A. atmospheric pressure
- B. gauge pressure
- C. absolute pressure
- D. mean pressure Discuss
- 10. The velocity at which the flow changes from laminar flow to turbulent flow is called
Options- A. critical velocity
- B. velocity of approach
- C. sub-sonic velocity
- D. super-sonic velocity Discuss
Hydraulics and Fluid Mechanics problems
Search Results
Correct Answer: newtonian fluid
Correct Answer: lies below
Correct Answer: tranquil flow
Correct Answer: gauge pressure
Correct Answer: Reynold's number
Correct Answer: wAx
Correct Answer: the liquid particles at different sections have different velocities
Correct Answer: discharge of liquid
Correct Answer: gauge pressure
Correct Answer: critical velocity
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.