Discussion
Home ‣ Mechanical Engineering ‣ Hydraulics and Fluid Mechanics Comments
- Question
If an incompressible liquid is continuously flowing through a pipe, the quantity of liquid passing per second is different at different sections.
Options- A. True
- B. False
- Correct Answer
- False
- 1. The discharge over a triangular notch is
Options- A. inversely proportional to H3/2
- B. directly proportional to H3/2
- C. inversely proportional to H5/2
- D. directly proportional to H5/2 Discuss
- 2. In a footstep bearing, if the speed of the shaft is doubled, then the torque required to overcome the viscous resistance will be
Options- A. double
- B. four times
- C. eight times
- D. sixteen times Discuss
- 3. A compound pipe is required to be replaced by a new pipe. The two pipes are said to be equivalent, if
Options- A. length of both the pipes is same
- B. diameter of both the pipes is same
- C. loss of head and discharge of both the pipes is same
- D. loss of head and velocity of flow in both the pipes is same Discuss
- 4. When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as
Options- A. steady flow
- B. turbulent flow
- C. vortex flow
- D. uniform flow Discuss
- 5. The Newton's law of resistance is based on the assumption that the
Options- A. planes of the body are completely smooth
- B. space around the body is completely filled with the fluid
- C. fluid particles do not exert any influence on one another
- D. all of the above Discuss
- 6. When the pipes are in series, the total head loss is equal to the sum of the head loss in each pipe.
Options- A. Yes
- B. No Discuss
- 7. An open tank containing liquid is made to move from rest with a uniform acceleration. The angle 0 which the free surface of liquid makes with the horizontal is such that (where a = Horizontal acceleration of the tank, and g = Acceleration due to gravity)
Options- A. tan ? = a/g
- B. tan ? = 2 a/g
- C. tan ? = a/2g
- D. tan ? = a2/2g Discuss
- 8. The tendency of a liquid to uplift a submerged body, because of the upward thrust of the liquid, is known as buoyancy.
Options- A. Agree
- B. Disagree Discuss
- 9. The flow of water through the hole in the bottom of a wash basin is an example of
Options- A. steady flow
- B. uniform flow
- C. free vortex
- D. forced vortex Discuss
- 10. The velocity at which the laminar flow stops, is known as
Options- A. velocity of approach
- B. lower critical velocity
- C. higher critical velocity
- D. none of these Discuss
Hydraulics and Fluid Mechanics problems
Search Results
Correct Answer: directly proportional to H5/2
Correct Answer: double
Correct Answer: loss of head and discharge of both the pipes is same
Correct Answer: vortex flow
Correct Answer: all of the above
Correct Answer: Yes
Correct Answer: tan ? = a/g
Correct Answer: Agree
Correct Answer: free vortex
Correct Answer: lower critical velocity
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.