logo

CuriousTab

CuriousTab

Discussion


Home Chemical Engineering Chemical Reaction Engineering Comments

  • Question
  • In an exothermic chemical reaction, the reactants compared to the products have


  • Options
  • A. higher temperature
  • B. more energy
  • C. less energy
  • D. same energy.

  • Correct Answer
  • more energy 


  • Chemical Reaction Engineering problems


    Search Results


    • 1. 'If the catalyst pore size is small in comparison with the mean free path, collisions with the pore wall controls the process'. The diffusivity under this condition is called 'Knudsen diffusivity', which is affected by the

    • Options
    • A. pressure
    • B. temperature
    • C. both (a) & (b)
    • D. neither (a) nor (b)
    • Discuss
    • 2. Radioactive decay follows __________ order kinetics.

    • Options
    • A. first
    • B. second
    • C. third
    • D. zero.
    • Discuss
    • 3. For an isothermal variable volume batch reactor, the following relation is applicable for a first order irreversible reaction.

    • Options
    • A. XA = k . t
    • B.
    • C. -ln(1 - XA) = kt
    • D. ?A . ln (1 - XA) = k . t
    • Discuss
    • 4. A catalyst loses its activity due to

    • Options
    • A. loss in surface area of the active component.
    • B. agglomeration of metal particles caused by thermal sintering of the solid surface.
    • C. covering of the catalytic active sites by a foregin substance.
    • D. all (a), (b) and (c).
    • Discuss
    • 5. For a zero order chemical reaction, the

    • Options
    • A. half life period is directly proportion to the initial concentration of the reac-tants.
    • B. plot of products concentration with time is a straight line through the origin.
    • C. products concentration increases linerarly with time.
    • D. all (a), (b) and (c).
    • Discuss
    • 6. Which of the following is the most suitable for very high pressure gas phase reaction?

    • Options
    • A. Batch reactor
    • B. Tubular flow reactor
    • C. Stirred tank reactor
    • D. Fluidised bed reactor
    • Discuss
    • 7. For a reaction of the type, , the rate of reaction (- rx) is given by

    • Options
    • A. (K1+K1)CX
    • B. (K1+K2+K3)CX
    • C. K1CV - K2CX
    • D. (K1-K2)CX
    • Discuss
    • 8. For high conversion in a highly exothermic solid catalysed reaction, use a __________ bed reactor.

    • Options
    • A. fixed
    • B. fluidised bed reactor followed by a fixed
    • C. fixed bed reactor followed by a fluidised
    • D. fluidised
    • Discuss
    • 9. Specific rate constant for a second order reaction

    • Options
    • A. is independent of temperature.
    • B. varies with temperature.
    • C. depends on the nature of the reactants.
    • D. both (b) and (c).
    • Discuss
    • 10. Pick out the wrong statement pertaining to space velocity of flow reactors.

    • Options
    • A. The unit of space velocity is (time)-1 .
    • B. The space velocity of 3 hr-1 means that three reactor volumes of feed at specified conditions are being fed into the reactor every hour.
    • C. The space velocity of 3 hr-1 means that one third reactor volume of feed at specified conditions are being fed into the reactor.
    • D. none of these.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment