logo

CuriousTab

CuriousTab

Discussion


Home Chemical Engineering Process Control and Instrumentation Comments

  • Question
  • Compositional analysis of __________ is done using mass spectrometer.


  • Options
  • A. an isotope
  • B. natural gas
  • C. a solid
  • D. an alloy

  • Correct Answer
  • an isotope 


  • Process Control and Instrumentation problems


    Search Results


    • 1. Nichol's chart deals with

    • Options
    • A. A.R. vs. phase lag of first order.
    • B. A.R. vs. phase lag of second order.
    • C. closed loop values vs. open loop values.
    • D. frequency response values of controllers.
    • Discuss
    • 2. Volumetric expansion is the working principle of the __________ thermometers.

    • Options
    • A. mercury in glass
    • B. constant volume gas
    • C. vapor pressure
    • D. bimetallic
    • Discuss
    • 3. In a single tank system, the transfer function of level to inlet flow rate is

    • Options
    • A. R/TS
    • B. R/(TS + 1)
    • C. l(TS + l)
    • D. 1/TS
    • Discuss
    • 4. A magnetic flowmeter is

    • Options
    • A. based on the principle of Faraday's law.
    • B. capable of measuring the flow rate of slurries and electrolytes.
    • C. based on the linear relationship between the fluid flow rate and the induced voltage.
    • D. all (a), (b) and (c).
    • Discuss
    • 5. Working principle of radiation pyrometer is based on the

    • Options
    • A. Wien's law
    • B. Kirchoffs law
    • C. Stafan-Boltzman law
    • D. Seebeck effect
    • Discuss
    • 6. The maximum service temperature for fibre glass used as thermocouple wire insulation material is __________ °C.

    • Options
    • A. 250
    • B. 500
    • C. 750
    • D. 1000
    • Discuss
    • 7. The operation of a rotameter is based on

    • Options
    • A. variable flow area.
    • B. rotation of a turbine.
    • C. pressure drop across a nozzle.
    • D. pressure at a stagnation point.
    • Discuss
    • 8. Which of the following will give maximum gas conversion?

    • Options
    • A. Fixed bed reactor.
    • B. Fluidised bed reactor.
    • C. Semi-fluidised bed reactor.
    • D. Plug-flow catalytic reactor.
    • Discuss
    • 9. A first order reaction requires two equal sized CSTR. The conversion is

    • Options
    • A. less when they are connected in series.
    • B. more when they are connected in series.
    • C. more when they are connected in parallel.
    • D. same whether they are connected in series or in parallel.
    • Discuss
    • 10. The reaction between oxygen and organic material is a/an __________ reaction.

    • Options
    • A. exothermic
    • B. endothermic
    • C. biochemical
    • D. photochemical
    • Discuss


    Comments

    There are no comments.

Enter a new Comment