logo

CuriousTab

CuriousTab

Discussion


Home Chemical Engineering Process Control and Instrumentation See What Others Are Saying!
  • Question
  • The second order system with the transfer function The second order system with the transfer function has a damping ratio of 2.0 0.5 1.0 4.0 has a damping ratio of


  • Options
  • A. 2.0
  • B. 0.5
  • C. 1.0
  • D. 4.0

  • Correct Answer
  • 0.5 


  • More questions

    • 1. Bubble cap tray is the most commonly used tray in large distillation column, because

    • Options
    • A. of its flexibility and nearly constant efficiency under varying conditions of operation.
    • B. it incurs less pressure drop as compared to any other try designed for the same duty.
    • C. it eliminates the foaming and entrain-ment tendency during operation.
    • D. none of these.
    • Discuss
    • 2. Accumulated sum at the end of 5 years, if Rs. 10000 is invested now at 10% interest per annum on a compound basis is Rs.

    • Options
    • A. 15000
    • B. 16105
    • C. 18105
    • D. 12500
    • Discuss
    • 3. Constantan is an alloy of

    • Options
    • A. Cu (55%) & Sn (45%).
    • B. Cu (55%) & Ni (45%).
    • C. Pt (95%) & Rh (10%).
    • D. Fe (80%) & Ni (20%).
    • Discuss
    • 4. For efficient grinding, ball mills must be operated

    • Options
    • A. at a speed less than the critical speed.
    • B. at a speed more than the critical speed.
    • C. at a speed equal to the critical speed.
    • D. with minimum possible small balls.
    • Discuss
    • 5. In screen analysis, the notation +5 mm/-10 mm means particles passing through

    • Options
    • A. 10 mm screen and retained on 5 mm screen.
    • B. 5 mm screen and retained on 10 mm screen.
    • C. both 5 mm and 10 mm screens.
    • D. neither 5 mm nor 10 mm screen.
    • Discuss
    • 6. The fractional volume change of the system for the isothermal gas phase reaction, A → 3B , between no conversion and complete conversion is

    • Options
    • A. 0.5
    • B. 1
    • C. 2
    • D. 3
    • Discuss
    • 7. A first order irreversible reaction, AB is carried out separately in a constant volume as well as in a variable volume reactor for a particular period. It signifies that __________ in the two reactors.

    • Options
    • A. both conversion as well as concentration are same
    • B. conversion in both will be the same but concentrations will be different
    • C. both the conversion as well as concentrations will be different
    • D. none of these.
    • Discuss
    • 8. Which of the following is not a product of tar distillation?

    • Options
    • A. Phenol & naphthalene
    • B. Benzol & pitch
    • C. Anthracene & creosote
    • D. None of these
    • Discuss
    • 9. __________ plant emits large amount of SO2 as an air pollutant.

    • Options
    • A. Nitric acid
    • B. Sulphuric acid
    • C. Chloralkali
    • D. Iron & steel
    • Discuss
    • 10. During agitation of liquids, power consumption during laminar flow is not proportional to the

    • Options
    • A. density of the liquid
    • B. viscosity of the liquid
    • C. cube of impeller diameters
    • D. square of rotational speed.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment