Discussion
Home ‣ Chemical Engineering ‣ Petroleum Refinery Engineering Comments
- Question
Flash point of atmospheric distillation residue is determined by __________ apparates.
Options- A. Pensky-Martens (closed cup type).
- B. Abel.
- C. Cleveland (open cup type)
- D. none of these.
- Correct Answer
- Cleveland (open cup type)
- 1. Complete removal of __________ from gasoline is done by Unisol process using caustic soda and methyl alcohol.
Options- A. waxes
- B. mercaptans
- C. asphalt
- D. diolefins Discuss
- 2. True boiling point apparatus is used for the
Options- A. determination of characterisation factor.
- B. evaluation of oil stocks.
- C. determination of true vapour pressure.
- D. none of these. Discuss
- 3. Most commonly used crude heater before the fractionation tower in a refinery is the __________ heater.
Options- A. electric immersion
- B. pipestill
- C. steam coil
- D. none of these Discuss
- 4. Stabilisation of gasoline (petrol) means
Options- A. removal of dissolved gases from it.
- B. increasing its oxidation stability.
- C. improving its lead susceptibility.
- D. increasing its vapour pressure. Discuss
- 5. Pick out the undesirable property for a solvent meant for dewaxing of lube oil.
Options- A. Complete miscibility with oil.
- B. High solubility of wax in the solvent.
- C. Both (a) and (b).
- D. Neither (a) nor (b). Discuss
- 6. Viscosity index of a lubricating oil
Options- A. is the measure of its flash point.
- B. is the measure of variation of viscosity with temperature.
- C. should be low.
- D. none of these. Discuss
- 7. Paraffin base crude oil as compared to asphalt base crude gives
Options- A. higher yield of straight run gasoline.
- B. higher octane number gasoline.
- C. lower viscosity index lube oil.
- D. poorer yield of lube oil. Discuss
- 8. Crude oil is pumped by a __________ pump.
Options- A. gear
- B. centrifugal
- C. screw
- D. reciprocating Discuss
- 9. A good lubricant should have high
Options- A. viscosity index
- B. volatility
- C. pour point
- D. none of these Discuss
- 10. Pick out the additive property of a lube oil out of following.
Options- A. °API gravity
- B. Specific gravity
- C. Viscosity
- D. Flashpoint Discuss
Petroleum Refinery Engineering problems
Search Results
Correct Answer: mercaptans
Correct Answer: none of these.
Correct Answer: pipestill
Correct Answer: removal of dissolved gases from it.
Correct Answer: Both (a) and (b).
Correct Answer: is the measure of variation of viscosity with temperature.
Correct Answer: higher yield of straight run gasoline.
Correct Answer: centrifugal
Correct Answer: viscosity index
Correct Answer: °API gravity
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.